| DEPARTMENT OF MECHANICAL ENGINEERING |
| 1 |
Jayapalan S., Bapu B.R.R., Kumar S.D., Kanishkar S.M., Venugopal J., Mariadhas A., Subbiah G. 2020 “ Impact of nano additives in di diesel engine to investigate performance and emission characteristics by using biodiesel blended with diesel” AIP Conference Proceedings, |
| 2 |
Jayapalan S., Bapu B.R.R., Kalaiyarasan, Hemanthkumar P., Venugopal J., Mariadhas A., Sivasaravanan S. 2020 “Experimental investigation on emission reduction in diesel engine by using biodiesel with catalytic converter”,AIP Conference Proceedings, ,10.1063/5.0034645 |
| 3 |
Jayapalan S., Bapu B.R.R., Kumar S.D., Kanishkar S.M., Venugopal J., Mariadhas A., Subbiah G.2020, “Impact of nano additives in di diesel engine to investigate performance and emission characteristics by using biodiesel blended with diesel ” AIP Conference Proceedings, 10.1063/5.0034641 |
| 4 |
Jayapalan S., Bapu B.R.R., Syed Khalid P., Sharuhan M., Venugopal J., Mariadhas A., Kachupalli S.R.S.R., 2020“Emission examination in diesel engine by using biodiesel fuel with electrochemical activated cell catalytic converter” ,AIP Conference Proceedings,2020,10.1063/5.0034637 |
| 5 |
Sukumar T., Ramesh Bapu B.R., Durga Prasad B. 2020 “Numerical analysis and experimental evaluation of rubber boot design Engineering Failure Analysis” 10.1016/j.engfailanal.2020.104867 |
| 6 |
Sukumar T., Ramesh Bapu B.R., Durga Prasad B. “Prediction of hyperelastic material sealing pressure using experimental and numerical analyses “,Journal of Elastomers and Plastics,10.1177/0095244319891211 |
| 7 |
Sivarethinamohan S., Sivarethinamohan R., Baskaran A., Ramakrishnan D 2020 “Rational suitability of low cost activated carbon in removing hexavalent chromium ions from wastewater by uninterrupted mode of adsorption”,IOP Conference Series: Materials Science and Engineering 10.1088/1757-899X/955/1/012087 |
| 8 |
Sadasivan N., Balasubramanian M., Rameshbapu B.R 2020 “A comprehensive review on equal channel angular pressing of bulk metal and sheet metal process methodology and its varied applications” .Journal of Manufacturing Processes 10.1016/j.jmapro.2020.10.032 |
| 9 |
Janarthanan R., Doss S., Baskar S 2020 “Optimized unsupervised deep learning assisted reconstructed coder in the on-nodule wearable sensor for human activity recognition.Measurement” Journal of the International Measurement Confederation, 10.1016/j.measurement.2020.108050 |
| 10 |
Kishore R., Karthikeyan K., Karthick G., Raja Rasalnath S. 2020 ,Comparative analysis on mechanical behavior of coir fiber composite by varying the fiber length and composition of filler materials,AIP Conference Proceedings,10.1063/5.0025410 |
| 11 |
Dinesh D., Nagendharan S., Diwakar Raviram R. 2020 “Design and performance analysis of curved fins with convex inner flow surface”AIP Conference Proceedings 10.1063/5.0025508 |
| 12 |
Kannan G.K., Nagendharan S., Krishnamoorthi S. 2020 Performance improvement in compact single cylinder IC engines for fuel efficient racing application ,AIP Conference Proceedings,10.1063/5.0028764 |
| 13 |
Ramesh Bapu B.R., Vijayakumar M.D. 2020 “Proceedings of International Conference on Recent Trends in Mechanical and Materials Engineering ICRTMME ,AIP Conference Proceedings,10.1063/12.0001159 |
| 14 |
Suresh A., Deepak Suresh Kumar R., Mohamed Jaasim H., Tamilarasan B., Mugilvarnan N., Vignesh A. 2020,Buckling analysis of 3D printed ABS thin cylinder at different percentage of infill’s,AIP Conference Proceedings10.1063/5.0025512 |
| 15 |
Partheeban P., Palani Kumar E., Breetha Y.J., Bazeem M. 2020 “Analysis of geofabrics in highway pavement materials”AIP Conference Proceedings 10.1063/5.0025155 |
| 16 |
Suresh A., Dhinakaran V., Kalidasan K., Surya S., Varsha Shree M. 2020 “Tensile analysis of 3D printed thin cylinder at different percentage of infill’s,AIP Conference Proceedings,10.1063/5.0025516 |
| 17 |
Kishore R., Sivaraj S., Karthikeyan K., Kathick G. 2020 “Design optimization and analysis of rear knuckle of ATV to reduce the manufacturing complexity and to improve strength” AIP Conference Proceedings,10.1063/5.0025408 |
| 18 |
Dhanasekaran A., Kumaraswamy S. 2020 “Experimental evaluation of affinity law of pumps by using multistage electric submersible pump at various speeds of operation” AIP Conference Proceedings,10.1063/5.0024932 |
| 19 |
Suresh A., Ramesh Bapu B.R., Ragalakshmi S., Prince Packiyaraj P., Adharsh S., Abul Kalam Azad A. 2020 “Improving and standardization of industrial workers related to cognitive ergonomics”AIP Conference Proceedings,10.1063/5.0025513 |
| 20 |
Kishore R., Yuwaraj K.R., Vinoth N., Kannan P. 2020 “Designing an optimized model of water lifting device without conventional practices”,AIP Conference Proceedings 10.1063/5.0025409 |
| 21 |
Veera Kishore C.H., Dhinakaran V., Jagadeesha T. 2020 “Study and analysis of stress and pressure variations on Indian railway wheel”AIP Conference Proceedings 10.1063/5.0024912 |
| 22 |
Rashid M., Dhinakaran V., Jagadeesha T. 2020 “Topology optimization of rigid flanged couplings using finite element analysis”AIP Conference Proceedings,10.1063/5.0024913 |
| 23 |
Prajwal S., Dhinakaran V., Jagadeesha T. 2020 “ Size optimization of shoulder filleted shafts with relief grooves for improving their fatigue life”AIP Conference Proceedings,10.1063/5.0024911 |
| 24 |
Manimaran M., Sakthi Balan G., Ravichandran M., Mohanavel V., Dhinakaran V. 2020 “Performance, emission analysis and optimization of biodiesel blend with CuO nano particle additive in di diesel engine” AIP Conference Proceedings 10.1063/5.0024978 |
| 25 |
Janaki Manohar N., Muthu Krishnan N., Rahul Kumar A. 2020 “Enhanced ergonomic design of driver seat”AIP Conference Proceedings10.1063/5.0026898 |
| 26 |
Agarwal R., Dhinakaran V., Jagadeesha T. 2020 “Fatigue analysis of similar and dissimilar spot welds”AIP Conference Proceedings10.1063/5.0024909 |
| 27 |
Saji N., Dhinakaran V., Jagadeesha T. 2020 “Finite element analysis of strength of different non-permanent joints subjected to eccentric loading”AIP Conference Proceedings 10.1063/5.0024910 |
| 28 |
Prabaharan T., Periasamy P., Mugendiran V., Varsha Shree M. 2020 “Influence of image pixels and image contrasts in computing 2D geometrical properties using MATLAB” AIP Conference Proceedings, 10.1063/5.0025041 |
| 29 |
Karthikeyan I., Dhinakaran V., Rajkumar V. 2020 “Evaluation of mechanical properties of aluminium 6063-Borosilicate reinforced metal matrix composite”AIP Conference Proceedings, 10.1063/5.0025114 |
| 30 |
Mohan E., Mamundi Azaath L., Marichamy S., Dhinakaran V. 2020 “The effect of impact damper on vibration control in internal turning operation”AIP Conference Proceedings,10.1063/5.0025023 |
| 31 |
Lokeshkumar J., Ramasamy N., Bak K.M. 2020, “Compressive response on Kevlar hybrid composite pipe under sea water environment”AIP Conference Proceedings 10.1063/5.0025018 |
| 32 |
Balasubramanian M., Radhakrishnan S., Rameshbapu B.R., Nagaraja A. 2020 “A case study on failure analysis of fender mounting bracket of tractors by DMAIC approach in Southern India”AIP Conference Proceedings, 10.1063/5.0024886 |
| 33 |
Krishna Kumar B., Vishnupriyan J., Chidambarathanu K., Vasudevan K.R. 2020 “Experimental investigations of high efficiency smart solar tunnel dryer system” AIP Conference Proceedings 10.1063/5.0024997 |
| 34 |
Mohanavel V., Suresh Kumar S., Ganeshan P., Vishnukumar R., Gurusamy P. 2020 “Physical, mechanical and wear performance of graphite (Gr) particles incorporated aluminium matrix composites-An overview” AIP Conference Proceedings 10.1063/5.0025354 |
| 35 |
Sathish T., Muthukumar K., Saravanan R., Dhinakaran V. 2020 “Investigation on waste tyre oil with diesel for detection of density, kinematic and dynamic viscosities evaluation of various combinations in volume basis” AIP Conference Proceedings,10.1063/5.0024963 |
| 36 |
Sathish T., Bala Subramanian D., Saravanan R., Dhinakaran V. 2020 “Experimental investigation of temperature variation on flat plate collector by using silicon carbide as a nanofluid” AIP Conference Proceedings 10.1063/5.0024965 |
| 37 |
Sathish T., Arunkumar S., Saravanan R., Dhinakaran V. 2020 “Experimental investigation on material characterization of zirconia reinforced Alumina ceramic composites via powder forming process” AIP Conference Proceedings 10.1063/5.0024964 |
| 38 |
Sathish T., Muthukumar K., Saravanan R., Dhinakaran V. 2020 “Study on temperature difference of aluminium nitride nanofluid used in solar flat plate collector over normal water “ AIP Conference Proceedings , 10.1063/5.0024966 |
| 39 |
Dhandapani N.V., Dhinakaran V., Krishnakumar K., Rajkumar V. 2020 “Transient thermal finite element simulation of moving gas tungsten arc welding on AISI 4340 aeronautical steel” AIP Conference Proceedings 10.1063/5.0025111 |
| 40 |
Saravanan S., Jayasuthahar S.T., Dhinakaran V., Sankar S. 2020 “Tribological characteristics of TiO2particles reinforced aluminum nanocomposites produced via liquid metallurgy techniques with ultrasonic vibrator” AIP Conference Proceedings,10.1063/5.0024981 |
| 41 |
Stalin B., Ravichandran M., Marichamy S., Choumya Devi T.D., Alagarsamy S.V., Dhinakaran V. 2020 “Friction welding parametric optimization of AISI 310L austenitic stainless steel weld joints-Grey relational investigation”AIP Conference Proceedings,10.1063/5.0024979 |
| 42 |
Sathish T., Subramanian D.B., Saravanan R., Dhinakaran V. 2020 “Experimental study about flash and fire point comparison on three combinations of waste tyre oil with diesel for alternate fuel properties identification” ,AIP Conference Proceedings,10.1063/5.0024958 |
| 43 |
Gurusamy P., Balasivanandha Prabu S., Nagasankar P., Muthuraman V., Mohanavel V. 2020 “Solidification behaviour of squeeze cast aluminium composites” AIP Conference Proceedings 10.1063/5.0025429 Vishnu Vardhan T., Stalin B., Marichamy S., Ravichandran M., Vairamuthu J., Dhinakaran V. 2020Material synthesis, characterization and machining performance of terbium metal matrix composite,AIP Conference Proceedings,10.1063/5.0024969 |
| 44 |
Stalin B., Vishnu Vardhan T., Marichamy S., Vairamuthu J., Ravichandran M., Dhinakaran V. 2020 “Investigations on ultrasonic machining of tellurium copper metal matrix “ AIP Conference Proceedings 10.1063/5.0024967 |
| 45 |
Muthukumaran K., Francis Xavier J., Ramadoss R., Balu P., Ezilarasan C. 2020 “Analysis of Thermal Barrier Coating’s Behaviors on Alloys – A Review” IOP Conference Series: Materials Science and Engineering, 10.1088/1757-899X/954/1/012025 |
| 46 |
Menaka R., Dhanagopal R., Archana N. 2020 “An efficient approach for secured data aggregation against security attacks in WSN” |
| 47 |
Proceedings of the 4th International Conference on IoT in Social, Mobile, Analytics and Cloud, ISMAC 10.1109/I-SMAC49090.2020.9243525 |
| 48 |
Franklin R.G., Muthukumar B. 2020 “Detection of diabetes mellitus using machine learning algorithms” International Journal of Research in Pharmaceutical Sciences 10.26452/ijrps.v11i4.3662 |
| 49 |
Anand S.A.A., George K., Thomas N.S., Kabilan S.2020 “Synthesis, characterization and antitumor activities of some novel thiazinones and thiosemicarbazones derivatives Phosphorus, Sulfur and Silicon and the Related Elements”10.1080/10426507.2020.1757672 |
| 50 |
Saravanan P., Kumar N.M., Ettappan M., Dhanagopal R., Vishnupriyan J. 2020 “Effect of exhaust gas re-circulation on performance, emission and combustion characteristics of ethanol-fueled diesel engine” Case Studies in Thermal Engineering 10.1016/j.csite.2020.100643 |
| 51 |
Ramakrishnan B., Durdu A., Rajagopal K., Akgul A. 2020 “Infinite attractors in a chaotic circuit with exponential memristor and Josephson junction resonator” AEU – International Journal of Electronics and Communications,10.1016/j.aeue.2020.153319 |
| 52 |
Dhanasekaran A., Kumaraswamy S. 2020 “Pressure pulsation in stages of electric submersible pump at shut- off under various speeds” |
| 53 |
Paiguan Jixie Gongcheng Xuebao/Journal of Drainage and Irrigation Machinery Engineering ,10.3969/j.issn.1674-8530.19.0276 |
| 54 |
Selvaraj P., Narayanan L.K. 2020 “Iot enhanced smart mirror for personal and commercial applications”International Journal of Advanced Trends in Computer Science and Engineering, 10.30534/ijatComputer science and engineering /2020/311942020 |
| 55 |
Narayanan L.K., Sankaranarayanan S., Rodrigues J.J.P.C., Lorenz P. 2020 “Multi-agent-based modeling for underground pipe health and water quality monitoring for supplying quality water” International Journal of Intelligent Information Technologies,10.4018/IJIIT.2020070103 |
| 56 |
George K., Thomas N.S., Malathi R. 2020 “4,4′-Diisothiocyanatostilbene-2,2′-disulfonate modulates voltage-gated K+ current and influences cell cycle arrest in androgen sensitive and insensitive human prostate cancer cell lines” Toxicology Mechanisms and Methods,10.1080/15376516.2020.1745343 |
| 57 |
Menaka D.R., Janarthanan D.R., Deeba D.K 2020 “ FPGA implementation of low power and high speed image edge detection algorithm”. |
| 58 |
Microprocessors and Microsystems,10.1016/j.micpro.2020.103053 |
| 59 |
Anuradha B., Packialakshmi S., Nagamani K., Sarala Devi J. 2020 “Statistical study of water users association for sustainable agriculture in rural development” Journal of Green Engineering,10.1063/5.0024821 |
| 60 |
Mary Rosana N.T., Joshua Amarnath D., Senthil Kumar P., Vincent Joseph K.L. 2020 “Potential of plant-based photosensitizers in dye-sensitized solar cell applications” Environmental Progress and Sustainable Energy,10.1002/ep.13351 |
| 61 |
Prabhu S., Murugan G., Cary M., Arulperumjothi M., Liu J.-B. 2020 “On certain distance and degree based topological indices of Zeolite LTA frameworks”Materials Research Express 10.1088/2053-1591/ab8b18 |
| 62 |
Karmaker A.K., Hossain M.A., Kumar N.M., Jagadeesan V., Jayakumar A., Ray B. 2020 “Analysis of using biogas resources for electric vehicle charging in Bangladesh: A techno-economic-environmental perspective”.Sustainability (Switzerland),10.3390/su12072579 |
| 63 |
Rajalakshmi K., Niranjana P., Praveen K., Ramesh R. 2020 “Clustering for extenuating the safety patron toss “International Journal of Control and Automation 10.3390/su12072579 |
| 64 |
Senthil K.G., Sampath T., Mohan R.M., Muthu V.N. 2020 “Hand recognition and gesture control using neural networks” International Journal of Control and Automation 10.3390/su12072579 |
| 65 |
Vijayaganapathy D., Rajarasalnath S., Kannan P., Dhivakar R.R.P. 2020 “Parametric analysis and designing of wind mill blade”International Journal of Control and Automation 10.3390/su12072579 |
| 66 |
Kishore R., Dhinakaran V., Karthick G., Vijayakumar M.D. 2020 “Comparative analysis using finite element methods and traditional method of natural composite hybrid particulate coir polyester with fillers red mud and egg shell” International Journal of Control and Automation 10.3390/su12072579 |
| 67 |
Shanmuga Selvam P., Robin Yogaraj J., Solomon Paul Raj I.D., Dhinakaran V. 2020 “Fabrication and characterization of aluminium and carbon fiber laminate composite” International Journal of Advanced Science and Technology 10.3390/su12072579 |
| 68 |
Dhinakaran V., Varsha Shree M., Raguraman D., Shanmuga Selvam P. 2020 “Analysis of pillion displacement during impact in monosuspension bike” International Journal of Advanced Science and Technology 10.3390/su12072579 |
| 69 |
Raguraman D., Dhanalakshmi B., Dhinakaran V., Vijayakumar M.D. 2020 “Adaptive ann-pso algorithm on tensile stress prediction for the dissimilar fsw butt joints of aa6061-az61 alloy” International Journal of Advanced Science and Technology,10.3390/su12072579 |
| 70 |
Gokulakrishnan S., Ramesh Bapu B.R., Ravinder R., Karthik G. 2020 “Fabrication of polymer matrix reinforced composite by using bio waste materials” International Journal of Advanced Science and Technology,10.3390/su12072579 |
| 71 |
Ganesh V., Pandikumar A., Alizadeh M., Kalidoss R., Baskar K. 2020 “Rational design and fabrication of surface tailored low dimensional Indium Gallium Nitride for photoelectrochemical water cleavage” International Journal of Hydrogen Energy,10.1016/j.ijhydene.2020.01.048 |
| 72 |
Dhinakaran V., Partheeban P., Raguraman D., Shree M.V., Sai M.S. 2020 “Powering Sustainable Development Through the Integration of Teaching and Research in Engineering Education” 6th International Conference on Advanced Computing and Communication Systems, ICACCS 10.1109/ICACCS48705.2020.9074449 |
| 73 |
Vijayakumar M.D., Dhinakaran V., Dhanalakshmi B., Bupathi Ram P.M., Surendar K. 2020 “Nourishing Indian Economy-through Curriculum Change in Rural Schools” 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020 |
| 74 |
Senthil kumar J., Ramesh Bapu B.R., Gugan R. 2020 “Emission examination on nanoparticle blended diesel in constant speed diesel engine |
| 75 |
Petroleum Science and Technology” 10.1080/10916466.2019.1683579 |
| 76 |
Dhinakaran V., Vigneswari K., Lavanya M., Varsha Shree M 2020 “Point-of-care applications with graphene in human life”.Comprehensive Analytical Chemistry,10.1016/bs.coac.2020.08.009 |
| 77 |
Dhinakaran V., Kumar K.P.M., Ram P.M.B., 2020 Ravichandran M., Vinayagamoorthy M. “A review on recent advancements in fused deposition modelling” Materials Today: Proceedings 10.1016/j.matpr.2019.12.036 |
| 78 |
Dhinakaran V., Surendar K.V., Riyaz M.S.H., Ravichandran M. 2020 “Review on study of thermosetting and thermoplastic materials in the automated fiber placement process” Materials Today: Proceedings 10.1016/j.matpr.2019.12.355 |
| 79 |
Dhinakaran V., Shriragav S.V., Fahmidha A.F.Y., Ravichandran M. 2020 “A review on the categorization of the welding process of pure titanium and its characterization” Materials Today: Proceedings 10.1016/j.matpr.2019.12.034 |
| 80 |
Dhinakaran V., Gokhulabalan B., Rahul Kumar A., Ravichandran M. 2020 “ Advancement in materials for industrial safety helmets”Materials Today: Proceedings 10.1016/j.matpr.2019.12.197 |
| 81 |
Dhanasekaran A., Kumaraswamy S. 2020 “Study of pulsation pressures in the stages of an electric submersible pump at shut-off under various speeds of operation “ Recent Patents on Mechanical Engineering,10.2174/2212797613666200220141119 |
| 82 |
Dhinakaran V., Lavanya M., Vigneswari K., Ravichandran M., Vijayakumar M.D. 2020 “Review on exploration of graphene in diverse applications and its future horizon”Materials Today: Proceedings 10.1016/j.matpr.2019.12.369 |
| 83 |
Somasundaram S., Ramesh Bapu B.R., Raj Jawahar R. 2020 “Tribological characteristics of n-(GO/WC-10Co-4Cr) HVOF coatings under biolubricant conditions” Surface Engineering 10.1080/02670844.2020.1762467 |
| 84 |
Ramesh Bapu B.R., Senthil kumar J., Shinde Y.N., Skaria D.A. 2020 “Emission investigation of VCR diesel engine by TiO2 nanocatalyst and Jamun biodiesel blended with diesel” International Journal of Ambient Energy,10.1080/01430750.2020.1758784 |
| 85 |
Chalawadi D., Babu S.P.K., Dhinakaran V. 2020 “Experimental investigation of TIG welded additive manufactured inco-718 sheets” Materials Research 10.1590/1980-5373-MR-2020-0076 |
| 86 |
Varsha Shree M., Dhinakaran V., Rajkumar V., Bupathi Ram P.M., Vijayakumar M.D., Sathish T. 2020 “Effect of 3D printing on supply chain management” Materials Today: Proceedings 10.1016/j.matpr.2019.09.060 |
| 87 |
Ashraff Ali K.S., Nirmal Kumar R., Amjath Z.A., Raman M., Vinayagam M. 2020 “Emission investigation on the effect of ultrasonic irradiation in neat biodiesel fuelled engine” International Journal of Ambient Energy 10.1080/01430750.2020.1722233 |
| 88 |
Veerappan G., Ravichandran M., Meignanamoorthy M., Mohanavel V. 2020 “Characterization and Properties of Silicon Carbide Reinforced Ni-10Co-5Cr (Superalloy) Matrix Composite Produced Via Powder Metallurgy Route Silicon”10.1007/s12633-020-00455-9 |
| 89 |
Jayapalan S., Bapu B.R.R., Kumar S.D., Kanishkar S.M., Venugopal J., Mariadhas A., Subbiah G.2020“Impact of nano additives in di diesel engine to investigate performance and emission characteristics by using biodiesel blended with diesel”, AIP Conference Proceedings, 10.1063/5.0034641 |
| 90 |
Stalin B., Ravichandran M., Mohanavel V., Raj L.P. 2020 “Investigations into microstructure and mechanical properties of Mg-5wt. %Cu-TiB2 composites produced via powder metallurgy route” Journal of Mining and Metallurgy, Section B: Metallurgy 10.2298/JMMB190315047S |
| 91 |
Dhinakaran V., Varsha Shree M., Jagadeesha T., Bupathi Ram P.M., Sathish T., 2020 “ Stalin B. A review on the recent developments in modeling heat and material transfer characteristics during welding” Materials Today: Proceedings 10.1016/j.matpr.2019.08.079 |
| 92 |
Swapna Sai M., Dhinakaran V., Manoj Kumar K.P., Rajkumar V., Stalin B., Sathish T. 2020 “A systematic review of effect of different welding process on mechanical properties of grade 5 titanium alloy” Materials Today: Proceedings10.1016/j.matpr.2019.09.027 |
| 93 |
Rajan K., Rajaram Narayanan M., Suresh Kumar S., Parthasarathi R., Mohanavel V. 2020 “A detailed study on improving the properties and performance aspects of biodiesel” International Journal of Ambient Energy 10.1080/01430750.2020.1725634 |
| 94 |
Rajan K., Rajaram Narayanan M., Ashraff Ali K.S., Prasanna B., Vinayagam M. 2020 “Analysis on the properties and emission characteristics of corn biodiesel subjected to improved transesterification” International Journal of Ambient Energy 10.1080/01430750.2020.1719888 |
| 95 |
Dhinakaran V., Ajith J., Fathima Yasin Fahmidha A., Jagadeesha T., Sathish T., Stalin B. 2020 “Wire Arc Additive Manufacturing (WAAM) process of nickel based superalloys-A review” Materials Today: Proceedings 10.1016/j.matpr.2019.08.159 |
| 96 |
Nagesha B.K., Dhinakaran V., Varsha Shree M., Manoj Kumar K.P., Chalawadi D., Sathish T. 2020 “Review on characterization and impacts of the lattice structure in additive manufacturing” Materials Today: Proceedings 10.1016/j.matpr.2019.08.158 |
| 97 |
Veeman D., Shanmugam N.S., Sathish T., Petle V., Sriram G. 2020 “Experimental investigation of plasma arc welded Ti-6Al-4V sheets |
| 98 |
Transactions of the Canadian Society for Mechanical Engineering” 10.1139/tcsme-2019-0149 |
| 99 |
Ashraff Ali K.S., Ramakrishnan C., Parthasarathi R., Inigo C., Vinayagam M. 2020 “Emission examination of lemongrass biodiesel and novel nanoparticle blends in research diesel engine” International Journal of Ambient Energy 10.1080/01430750.2020.1722235 |
| 100 |
Mohanavel V., Ravichandran M., Suresh Kumar S., Melwin Jagadeesh Sridhar M., Dineshkumar S., Pavithra M.M. 2020 “Microstructural and tribological characterization of Al/egg shell ash composites prepared by liquid metallurgy process”,Journal of the Balkan Tribological Association 10.3390/su12072579 |
| 101 |
Jayabalakrishnan D., Saravanan K., Ravi S., Prabhu P., Maridurai T., Prakash V.R.A. 2020 “Fabrication and Characterization of Acrylonitrile Butadiene Rubber and Stitched E-Glass Fibre Tailored Nano-Silica Epoxy Resin Composite Silicon”10.1007/s12633-020-00612-0 |
| 102 |
Karthigairajan M., Nagarajan P.K., Raviraja Malarvannan R., Ramesh Bapu B.R., Jayabalakrishnan D., Maridurai T., Shanmuganathan V.K. 2020 “Effect of Silane-Treated Rice Husk Derived Biosilica on Visco-Elastic, Thermal Conductivity and Hydrophobicity Behavior of Epoxy Biocomposite Coating for Air-Duct Application Silicon” 10.1007/s12633-020-00772-z |
| 103 |
Rajagopal K., Nazarimehr F., Karthikeyan A., Srinivasan A., Jafari S. 2020 “CAMO: Self-Excited and Hidden Chaotic Flows” International Journal of Bifurcation and Chaos 10.1142/S0218127419501438 |
| 104 |
Yuvaraja S., Arunkumar G., Venu Sai B., Rajan P., Dhinakaran V. 2020 “Design and development of a compliant clutch fork using topology optimization” International Journal of Innovative Technology and Exploring Engineering 10.35940/ijitee.K2539.0981119 |
| 105 |
Kumar J.S., Bapu B.R.R. 2020 “Comparision of performance and emission characteristics of dl diesel engine by using ajwain and cinnamon biodiesel blend with diesel” Indian Journal of Environmental Protection 10.3390/su12072579 |
| 106 |
Jayapriya J., Muruganandam D., Raguraman D., Senthilkumar B., Dhinakaran V. 2020 “Design and fabrication of multi-rotor horizontal axis wind turbine “ International Journal of Engineering and Advanced Technology 10.35940/ijeat.F9528.088619 |
| 107 |
Gunasekar P., Manigandan S., Gokulnath R., Venkatesh S., Rakesh Vimal M., Booma Devi P., Dhinakaran V. 2020 “Effect of carbon nanotubes on sheet molding composite analysis for automotive application: FEA method” International Journal of Innovative Technology and Exploring Engineering 10.35940/ijitee.i8978.078919 |
| 108 |
Shanmugaselvam P., Sivaraj S., Subash P. 2020 “Investigating the wear and hardness of aluminium LM25 alloy reinforced with nano Al2O3 and nano TiB2” Materials Today: Proceedings 10.1016/j.matpr.2019.05.205 |
| 109 |
Arumugam D., Sivasailam K. 2020 “Investigation of pressure pulsation in the stages of an electric submersible pump at best efficiency point under various speeds”ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019 10.1115/AJKFluids2019-5081 |
| 110 |
Arunkumar M., Dhinakaran V., Siva Shanmugam N. 2020 “Numerical prediction of temperature distribution and residual stresses on plasma arc welded thin titanium sheets” International Journal of Modelling and Simulation 10.1080/02286203.2019.170008 |
| 111 |
Senthil Kumar J., Ramesh Bapu B.R., Sivasaravanan S., Prabhu M., Muthu Kumar S., Abubacker M.A. 2020 “Experimental studies on emission reduction in a DI diesel engine by using a nano catalyst coated catalytic converter” International Journal of Ambient Energy10.1080/01430750.2019.1694584 |
| 112 |
Senthil Kumar J., Ramesh Bapu B.R. 2020 “Cerium oxide nano additive impact of VCR diesel engine characteristics by using Ginger grass oil blended with diesel” International Journal of Ambient Energy 10.1080/01430750.2019.1653975 |
| 113 |
Dattatreya V., Ramesh Bapu B.R., Durga Prasad B. 2020 “Study of combustion characteristics on single cylinder direct injection diesel engine with plasma and HVOF coated ceramic powders on piston crown” Materials Today: Proceedings 10.1016/j.matpr.2019.05.137 |
| 114 |
Arunkumar M., Dhinakaran V., Sivashanmugam N., Petley V. 2020 “Effect of plasma Arc welding on residual stress and distortion of thin titanium sheet “ Materials Research 10.1590/1980-5373-MR-2019-0366 |
| 115 |
Anand K.T., Rajan A.J., Bapu B.R.R 2020 “Development of a method to compute the overall key performance index for a spinning mill to aid supply chain management” Fibres and Textiles in Eastern Europe 10.5604/01.3001.0013.2363 |
| 116 |
Kumar L.S., Bapu B.R.R., Prakash R. 2020 “ exhaust gas temperature on emissions in CI engine fuelled with Calophyllum inophyllum methyl ester blends with diesel” Progress in Industrial Ecology 10.1504/PIE.2019.100891 |
| 117 |
S.Krishnan, K.Pradeepa, P.Thirumal 2019 “Open Loop And Closed Loop Analysis Of Interleaved Converter For Solar Power Generation Systems” International Journal of Mechanical Engineering and Technology (IJMET) ISSN Print:0976 – 6340, Online:0976 – 6359 |
| 118 |
Krishnamoorthi, S., Nagendharan, S., Manikandan, G., Karthikeyan, R. 2019 “Studies on mechanical and thermal bheviours of nano clay filled linear low density polyethylene composites”International Journal of Recent Technology and Engineering |
| 119 |
Kumar N.M., Gupta R.P., Mathew M., Jayakumar A., Singh N.K. 2019 “Performance, energy loss, and degradation prediction of roofintegrated crystalline solar PV system installed in Northern India” Case Studies in Thermal Engineering |
| 120 |
Rajagopal K., Vaidyanathan S., Karthikeyan A., 2018 Duraisamy P. “Erratum to: Dynamic analysis and chaos suppression in a fractional order brushless DC motor(Electr Eng, 10.1007/s00202-016-0444-8) |
| 121 |
Rajagopal K., Vaidyanathan S., Karthikeyan A., Duraisamy P. 2018 “Dynamic analysis and chaos suppression in a fractional order brushless DC motor” |
| 122 |
Kishore R., Karthick G., Vijayakumar M.D., Dhinakaran V. 2019”Analysis of mechanical behaviour of natural filler and fiber based composite materials” International Journal of Recent Technology and Engineering |
| 123 |
Krishnamoorthi S., Dinesh D., Karthikeyan R., Manikandan G. 2019 “Heat treatment parameters to optimize hardness behavior of carbon steel using taguchi technique” International Journal of Recent Technology and Engineering |
| 124 |
Gowda T., Jagadeesha T., Dhinakaran V. 2019 “Optimization of design parameters of aircraft wing structure with large cut outs using damage tolerant design and finite element analysis approach “ International Journal of Recent Technology and Engineering |
| 125 |
Vijayakumar M.D., Gopalaramasubramaniyan G., Dhinakaran V. 2019 “Microstructural investigation of is513cr3 by comparing with plain coolant, ice, Ln2 gas in single point incremental forming” International Journal of Recent Technology and Engineering |
| 126 |
Vijayakumar M.D., Gopalaramasubramaniyan G., Dhinakaran V. 2019 “Microstructural investigation of is513cr3 by comparing with plain coolant, ice, Ln2 gas in single point incremental forming” International Journal of Recent Technology and Engineering |
| 127 |
Sriram G., Dhinakaran V., Jagadeesha T., Ramgopal R. 2019 “Finite element simulation of temperature distribution and residual stress in single bead on plate weld trial using double ellipsoidal heat source model” International Journal of Recent Technology and Engineering |
| 128 |
Jaiganesh V., Ravi Raja Malarvannan R., Manikandan G., Krishnamoorthi S. 2019 “Investigation of the mechanical properties of natural fiber reinforced composites of morinda citrifolia with epoxy and bisphenol resin” International Journal of Recent Technology and Engineering |
| 129 |
Ajay M., Kannan S., Prem Narayan P., Deepak Suresh Kumar R. 2019 “A Glance Through History of Automobile Industry and Current Market Study of Some of the Legendry Models in India” Lecture Notes in Mechanical Engineering 10.1007/978-981-13-6374-0_49 |
| 130 |
Illyas S.M., Bapu B.R.R., Rao V.V.S. 2019 “Experimental analysis of heat transfer and multi objective optimization of swirling jet impingement on a flat surface” Journal of Applied Fluid Mechanics 10.29252/JAFM.12.03.29172 |
| 131 |
Shanmugaselvam P., Sasikumar R., Sivaraj S. 2019 “Investigation of Hardness and Tribological Behaviour of Aluminium Alloy LM30 Reinforced with Silicon Carbide, Boron Carbide and Graphite” Lecture Notes in Mechanical Engineering 10.1007/978-981-13-6374-0_62 |
| 132 |
Binoj J.S., Bibin J.S. 2019 “Failure analysis of discarded Agave tequilana fiber polymer composites” Engineering Failure Analysis |
| 133 |
10.1016/j.engfailanal.2018.09.019 |
| 134 |
Sukumar T., Ramesh Bapu B.R., Durga Prasad D. 2019 “Numerical and Experimental Evaluation of Hyperelastic Material Parameters” Lecture Notes in Mechanical Engineering 10.1007/978-981-13-1780-4_47 |
| 135 |
Stephen Bernard S., Javeed Ahmed M., Dasaprakash J., Saroj Nitin M.R., Vivek S., Kannan G.K. 2019 “Friction and Wear Properties of Bio-Based Abrasive in a High-Friction Composite Material” Lecture Notes in Mechanical Engineering 10.1007/978-981-13-6374-0_63 |
| 136 |
Sukumar T., Ramesh Bapu B.R., Durga Prasad B., Vijay Prithiv B.R. 2019 “Numerical Analysis and Design Optimization of Lip Seal Opening Pressure for Automotive Valves “ Lecture Notes in Mechanical Engineering 10.1007/978-981-13-6374-0_15 |
| 137 |
Vijayavel P., Balasubramanian V. 2019 “Effect of pin volume ratio on wear behaviour of friction stir processed LM25AA-5%SiCp metal matrix composites” Alexandria Engineering Journal 10.1016/j.aej.2018.07.008 |
| 138 |
Vallapudi D.R., Makineni H.K., Pisipaty S.K., Venu H. 2019 “Combined impact of EGR and injection pressure in performance improvement and NOx control of a DI diesel engine powered with tamarind seed biodiesel blend”Environmental Science and Pollution Research 10.1007/s11356-018-3540-7 |
| 139 |
Venu H., Dinesh Babu M. 2019 “Improvement of ternary fuel combustion with various injection pressure strategies in a toroidal re-entrant combustion chamber” Environmental Science and Pollution Research 10.1007/s11356-018-3174-9 |
| 140 |
Kumar S.D., Ravichandran M. 2019 “ Synthesis, Characterization and Wire Electric Erosion Behaviour of AA7178-10 wt.% ZrB2 Composite Silicon”10.1007/s12633-018-9802-7 |
| 141 |
Stalin B., Sudha G.T., Ravichandran M. 2019 “Investigations on Characterization and Properties of Al-MoO3 Composites Synthesized Using Powder Metallurgy Technique Silicon” 10.1007/s12633-018-9803-6 |
| 142 |
Mohamed Illyas S., Ramesh Bapu B.R., Venkata Subba Rao V. 2019 “Heat transfer and flow visualization of swirling impinging jet on flat surface using helicoid inserts “ Journal of Visualization 10.1007/s12650-018-0493-3 |
| 143 |
T.Sathish, M.D.Vijayakumar, P.Periyasamy 2018 “Analysis And Modeling Of Support Vector Mechanism For The Biomass Gasification Process” International Conference of Recent Advances in Mechanical Engineering PISSN: 1812-1837, EISSN 2312-7791 |
| 144 |
Vimalanathan K and Ramesh Babu T 2018 “A Study on the Effect of Ergonomics on Computer Operating Office Workers in India”10.4172/2165-7556.1000211 |
| 145 |
Senthil Kumar J., Ramesh Bapu B.R. 2018 “Experimental analysis of DI diesel engine using dual biofuel blended with diesel” International Journal of Ambient Energy 10.1080/01430750.2018.1472647 |
| 146 |
Pandian A.K., Munuswamy D.B., Radhakrishanan S., Devarajan Y., Ramakrishnan R.B.B., Nagappan B. 2018 “Emission and performance analysis of a diesel engine burning cashew nut shell oil bio diesel mixed with hexanol Petroleum Science” 10.1007/s12182-017-0208-8 |
| 147 |
Vijaya Kumar M.D., Vignesh Kumar U. 2018 “Defect rectification in forging operation and optimizing the process parameters” Lecture Notes in Mechanical Engineering 10.1007/978-981-13-1724-8_49 |
| 148 |
Sukumar T., Bapu B.R.R., Prasad B.D. 2018 “Determination of sealing pressure in hyperelastic O-ring with different hardness using numerical method” Journal of Elastomers and Plastics 10.1177/0095244318817889 |
| 149 |
Muthuraman P., Omkumar M. 2018 “Processing and characterisation of aluminium-nano iron composite preforms during cold upsetting” Journal of the Balkan Tribological Association |
| 150 |
Sathish T., Vijayakumar M.D., Krishnan Ayyangar A. 2018 “Design and Fabrication of Industrial Components Using 3D Printing” Materials Today: Proceedings 10.1016/j.matpr.2018.03.036 |
| 151 |
Stalin B., Meignanamoorthy M., Ravichandran M. 2018 “Synthesis of metal matrix composites and alloys by mechanical alloying: A Review”IOP Conference Series: Materials Science and Engineering 10.1088/1757-899X/402/1/012097 |
| 152 |
Stalin B., Ravichandran M., Arivukkarasan S., Mohanavel V. 2018 “Weight loss corrosion studies of aluminium-LM4 reinforced with alumina silicate (Al2O3SiO2) particulates composites in sodium chloride (NACL) solution”International Journal of Mechanical and Production Engineering Research and Development |
| 153 |
Krishnan S., Pradeepa K., Thirumal P. 2018 “Open loop and closed loop analysis of interleaved converter for solar power generation systems”International Journal of Mechanical Engineering and Technology |
| 154 |
Dhinakaran V., Siva Shanmugam N., Sankaranarayanasamy K., Rahul R. 2018” Analytical and numerical investigations of weld bead shape in plasma arc welding of thin Ti-6al-4v sheets Simulation” 10.1177/0037549717726580 |
| 155 |
Kishore Pandian A., Munuswamy D.B., Radhakrishana S., Bathey Ramakrishnan R.B., Nagappan B., Devarajan Y. 2018 “Influence of an oxygenated additive on emission of an engine fueled with neat biodiesel” Petroleum Science 10.1007/s12182-017-0186-x |
| 156 |
Pandian A.K., Ramakrishnan R.B.B., Devarajan Y. 2018 “ Emission analysis on the effect of nanoparticles on neat biodiesel in unmodified diesel engine” Environmental Science and Pollution Research 10.1007/s11356-017-9973-6 |
| 157 |
Ramesh Bapu B.R., Gayathri N., Vijayakumar B., Shanmuganathan V.K. 2018 “ Chemical synthesis and characterization of thoria incorporated yttria ceria-stabilized zirconia nano particles for high temperature applications” Digest Journal of Nanomaterials and Biostructures |
| 158 |
Gaikwad P.U., Balan K.N., Ramesh Bapu B.R. 2018 “ Performance analysis of neem and palm bio-diesel blend on diesel engine – A review”International Review of Mechanical Engineering 10.15866/ireme.v11i9.13244 |
| 159 |
Rajagopal K., Karthikeyan A., Duraisamy P. 2018 “ Chaos Suppression in Fractional order Permanent Magnet Synchronous Generator in Wind Turbine Systems” Nonlinear Engineering 10.1515/nleng-2016-0059 |
| 160 |
R.Kishore 2017 “Home Automation Using Wi-Fi Interconnection”International Research Journal of Engineering and Technology 2395-0072 |
| 161 |
V.Ravin Rose 2017 “ Development & Construction of Reverse Gear Mechanism for Physically Challenged Vehicle” International Journal for Scientific Research & Development ISSN:2321-0613 |
| 162 |
Senthil Kumar J., Ganesan S., Sivasaravanan S., Padmanabhan S., Krishnan L., Aniruthan V.C. 2017 “Effects of Nano Additives in engine emission Characteristics using Blends of Lemon Balm oil with Diesel” IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/197/1/012022 |
| 163 |
Kanimozhi B., Ramesh Bapu B.R., Pranesh V. 2017 “ Thermal energy storage system operating with phase change materials for solar water heating applications: DOE modelling” Applied Thermal Engineering 10.1016/j.applthermaleng.2017.05.122 |
| 164 |
Rajagopal K., Karthikeyan A., Srinivasan A.K. 2017 “FPGA implementation of novel fractional-order chaotic systems with two equilibriums and no equilibrium and its adaptive sliding mode synchronization “ Nonlinear Dynamics |
| 165 |
Rajagopal K., Karthikeyan A. 2017 “ Chaos suppression of fractional order Willamowski-Rössler chemical system and its synchronization using sliding mode control” Nonlinear Engineering |
| 166 |
Rajagopal K., Karthikeyan A., Duraisamy P. 2017 “Chaos Suppression in Fractional Order Permanent Magnet Synchronous Motor and PI controlled Induction motor by Extended Back stepping Control” Nonlinear Engineering |
| 167 |
Ramesh Bapu B.R., Saravanakumar L., Durga Prasad B. 2017 “Effects of combustion chamber geometry on combustion characteristics of a DI diesel engine fueled with calophyllum inophyllum methyl ester “ Journal of the Energy Institute 10.1016/j.joei.2015.10.004 |
| 168 |
M.D.Vijayakumar, M.JanakiManohar, C.Silamparasan, 2016 “ Experimental Investigation of SS 410 using NdYag Laser Cutting” International Journal of Advanced and Innovative Research vol.04. Is. 06 2278-7844 |
| 169 |
Surendran.R, Shanmugaselvam.P and Kumaravel.A 2016 “Evaluation Of Wear And Hardness Of LM25 Alloy Reinforced With Nano Al2O3 And Micro Tib2 “ International Journal of Applied Engineering Research ISSN 0973-456 |
| 170 |
L.Saravanakumar Dr.B.R.Ramesh Bapu Dr.B.Durga Prasad 2016 “Effect of Injection Pressure and Combustion Chamber Geometry on Diesel Engine Fueled with CalophyllumInophyllum Methyl Ester “ International Journal of Applied Engineering Research ISSN 0973-4562 |
| 171 |
B.R. Ramesh Bapu , L.Saravanakumar, B.Durga Prasad 2016 “ Effects of Combustion Chamber Geometry on Combustion Characteristics of a DI Diesel Engine Fueled with Calophyllum Inophyllum Methyl Ester” Journal of the Energy Institute 10.1016/j.joei.2015.10.004 |
| 172 |
Praveen Kumar K, Janaki Manohar 2016 “Finite Element Analysis and Optimization Of An One Way Clutch Used In Automatic Transmission Based On Global Parameters” IJRET-International Journal Of Research In Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308 |
| 173 |
Surendran.R, Shanmugaselvam.P, Kumaravel.A 2016 “ Evaluation Of Wear And Hardness Of LM25 Alloy Reinforced With Nano Al2O3 And Micro Tib2” International Journal of Applied Engineering Research ISSN 0973-4562 |
| 174 |
Mr.S.Kannan, Mr.P.PrincePackiyaraj 2016 “ Fabrication and Analysis of Engine Valve Guide” ISSN 0973-4562 |
| 175 |
D.Kumaryogeesh, B.R.Ramesh bapu Erikiananda.K2016 “Modeling and Simulation of shock absorber for noise rectification” ISSN 0973-4562 |
| 176 |
K.T.AnandA. John RajanK. V. Narayanan B.R. Ramesh Bapu 2016 “ The Impact of Plasma Treatment as a Sustainable and Green Technology on the Supply Chain Management of the Spinning Mills” ISSN 0973-4562 |
| 177 |
Gayathri.N,Ramesh Bapu.B.R, Shanmuganthan.V.KRaphael.T 2016 “ Surface Analysis of Ceramic Coated Turbine blade” International Journal of Applied Engineering Research ISSN 0973-4562 |
| 178 |
G.Suganya, B.R.Ramesh Bapu, 2016 “ Investigative Research Of Compact pcm Filled Thin Tube Latent Heat Solar Water Heater” International Journal of Applied Engineering Research ISSN 0973-4562 |
| 179 |
Suganya G., Ramesh Bapu B.R. 2016 “Experimental studies on performance of latent heat thermal energy storage unit integrated with solar water heater” International Journal of Chemical Sciences |
| 180 |
Anand K.T., John Rajan A., Narayanan K.V., Ramesh Bapu B.R. 2016 “Key variables in the control of lead time in spinning mills Fibres and Textiles in Eastern Europe” 10.5604/12303666.1179078 |
| 181 |
Anand K.T., John Rajan A., Narayanan K.V., Ramesh Bapu B.R. 2016 “The impact of plasma treatment as a sustainable and green technology on the supply chain management of the spinning mills” International Journal of Applied Engineering Research |
