fbpx

Research Publications

Department of Civil Engineering

S.No List of Publications:
1 Anuradha, B., Kavitha, A., Packialakshmi, S., Sujatha, S. 2019 “Role of irrigation tank rehabilitation and related off-farm activities in achieving sustainable rural development”, Journal of Green Engineering Vol 7,Issue :10.
2 Anuradha, B., Packialakshmi, S., Nagamani, K., Sarala Devi, J. 2019 “Statistical study of water users association for sustainable agriculture in rural development” Journal of Green Engineering Vol 7,Issue :10.
3 Kamalanandhini M., Sindhu K., Gowri R., Shenbagavalli M. 2020 “Pedestrian vulnerability analysis using quantum GIS”, International Journal of Civil Engineering and Technology 8,Issue 4
4 Anuradha B., Packialakshmi S., Nagamani K., Sarala Devi J. 2020 “Statistical study of water users association for sustainable agriculture in rural development”Journal of Green Engineering,10.1063/5.0024821
5 Dhinakaran V., Partheeban P., Ramesh R., Balamurali R., Dhanagopal R. 2020 “Behavior and Characteristic Changes of Generation Z Engineering Students” 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020 10.1109/ICACCS48705.2020.9074322
6 Dhinakaran V., Partheeban P., Raguraman D., Shree M.V., Sai M.S. 2020 “Powering Sustainable Development Through the Integration of Teaching and Research in Engineering Education” 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020 10.1109/ICACCS48705.2020.9074449

Department Of Computer Science and Engineering

S.No List of Publications:
1 Somasundaram K et al. 2020  “Virtual infrastructure provisioning virtual machine with machine learning prediction in green cloud computing” Journal of Green Engineering,2020,10.1063/5.0024821
2 Subramanian S., Sundarambal B., Nirmal D.2019, “Investigation on Simulation-Based Specific Absorption Rate in Ultra-Wideband Antenna for Breast Cancer Detection”, IEEE Sensors Journal, 10.1109/JSEN.2018.2875621
3 Muthuselvan S., Somasundaram K., Rajaprakash S.2020, “Preference Findings for Coding Phase in Software Development Process using Intuitionistic Fuzzy Process” 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020, 10.1109/ICACCS48705.2020.9074339
4 Sivabalan A., Pavithra S., Selvarani R., Vinitha K.M 2020  “Design of microstrip patch antenna for 5G” International Journal of Control and Automation,10.3390/su12072579
5 Somasundaram K et al. 2020  “Design of energy efficient datacenter with optimized virtual infrastructure”  AIP Conference Proceedings,10.1063/5.0024789
6 Menaka R., Mathana J.M., Dhanagopal R., Sundarambal B. 2020, “Performance Evaluation of DSR Protocol in MANET Untrustworthy Environment” 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020, 10.1109/ICACCS48705.2020.9074268
7 Somasundaram K et al. 2020   “Detection of selective forwarding attack using BDRM in wireless sensor network AIP Conference Proceedings 10.1063/5.0024821
8 Janarthanan R., Doss S., Balamurali R. 2020 “Robotic-based nonlinear device fault detection with sensor fault and limited capacity for communication”, Journal of Ambient Intelligence and Humanized Computing” Volume 11, Issue 12
9 Sundarambal B., Mathana J.M., Subramanian S., Sandesh H., Omprakash G.  2020 “A Detailed Investigation on Reduction of False Positive Rate in Breast Cancer Detection”, 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020 Article number 9074382, Pages 1077-1079
10 Subramanian S., Sundarambal B  2020 “Compact Micro Strip Fed Koch Fractal Monopole Loop Antenna for Multiband Performance”. 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020 Article number 9074354, Pages 1438-1439
11 Bhuvaneswari S., Ashlin Jinushia R., Madhavan K., Thandapani T. 2020 “Automated Exterior Wall Painting Robot Using Raspberry Pi”2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020 10.1109/ICACCS48705.2020.9074393
12 Pavithra S., Janakiraman S ,“Enhanced polynomial kernel (EPK)–based support vector machine (SVM) (EPK-SVM) classification technique for speech recognition in hearing-impaired listeners”. Concurrency Computation Article number e5210
13  Franklin R.G., Muthukumar B. “A prediction system for diagnosis of diabetes mellitus, Journal of Computational and Theoretical Nanoscience”, Volume 17, Issue 1, 2020, Pages 6-9
14 Sundarambal B., Subramanian S., Muthukumar B. “A hybrid encoding strategy for classification of medical imaging modalities” Journal of Ambient Intelligence and Humanized Computing, Article in Press
15 Menaka D.R., Janarthanan D.R., Deeba D.K 2020 “ FPGA implementation of low power and high speed image edge detection algorithm”. Microprocessors and Microsystems,10.1016/j.micpro.2020.103053
16 Ramesh R. et al 2020 “Clustering for extenuating the safety patron toss” International Journal of Control and Automation 10.3390/su12072579
17 Senthil K.G., Sampath T., Mohan R.M., Muthu V.N. 2020  “Hand recognition and gesture control using neural networks”  International Journal of Control and Automation,10.3390/su12072579
18 Janarthanan, Suresh Kumar V., Praveen K., Ramesh R. 2020 “Automatic electronic secure payment in toll plaza using nfc technology”  International Journal of Advanced Science and Technology,10.3390/su12072579
19 Amutha S., Bhuvaneswari S., Rajes K.S., Annapoorani A. 2020 “Multipurpose smart assistant” International Journal of Control and Automation,
20
21 Sivabalan A., Pavithra S., Selvarani R., Vinitha K.M 2020  “Design of microstrip patch antenna for 5G” International Journal of Control and Automation,10.3390/su12072579
22 Vimala V., Ettappan M., Chandrasekaran R., Janarthanan R. 2020  “A text based natural dialogue system using entity retrieval for news documents” International Journal of Control and Automation 10.3390/su12072579
23 Ettappan M., Vimala V., Ramesh S., Kesavan V.T. 2020 “Optimal reactive power dispatch for real power loss minimization and voltage stability enhancement using Artificial Bee Colony Algorithm” Microprocessors and Microsystems
24 Maheswaran G., Balamurali R., Sundarambal B., Soundarya Priyadharshini S., Vinodhini P.
25 2020 “A smart plug for controlling and automation anywhere using IoT” International Journal of Advanced Science and Technology  10.3390/su12072579
26 Annapoorani A., Pandimeena R., Dhanalakshmi B.B., Amutha S. 2020 “Reduction of water consumption in agriculture smart farms based on internet of things (IoT)”International Journal of Control and Automation
27
28 Ramesh R., Menaka R S., Kannan R., Nisha K. 2020 “Powerful spectrum aid sharing with dynamic handoff & optimized cost fixation in cognitive radio” International Journal of Advanced Science and Technology 10.3390/su12072579
29 Muthukumar B., Dhanagopal R., Ramesh R.2020, “KYP modeling architecture for cardiovascular diseases and treatments in healthcare institutions”Journal of Ambient Intelligence and Humanized Computing, 10.1007/s12652-019-01653-z
30 Kumar B.S., Cristin R., Karthick K., Daniya T. 2020 “Study of Shadow and Reflection based Image Forgery Detection” 2019 International Conference on Computer Communication and Informatics, ICCCI 2019 10.1109/ICCCI.2019.8822057
31 Pavithra S., Sivabalan A., Visvak K.T.S.,  Sathish K.K., Santhosh K.S. 2020 “Gateway monitoring using open WRT” International Journal of Control and Automation,10.3390/su12072579
32 Kannan S.R., Sikamani K.T., Somasundaram K. 2020 “Reducing the Event Stoppage for Traffic Watching System Mistreatment Wireless Reversible Device Networks”6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020 10.1109/ICACCS48705.2020.9074190
33 Muthuselvan S., Somasundaram K., Rajaprakash S. 2020 “Analysis of software requirement analysis in software development process using intelligent agent with intuitionistic fuzzy analytical hierarchical process” International Journal of Scientific and Technology Research
34 10.1109/ICACCS48705.2020.9074402
35 Dhinakaran V., Partheeban P., Ramesh R., Balamurali R., Dhanagopal R. 2020 “ Behavior and Characteristic Changes of Generation Z Engineering Students” 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020 10.1109/ICACCS48705.2020.9074322
36 Kumar G.S., Kandavel N., Madhavan K. 2020 “To Discovery the Cloud Services Authentication An Expert Based System Using Multi-Factor Authentication 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020 10.1109/ICACCS48705.2020.9074195
37 Pavithra S., Ramesh R., Sundrambal B. 2020 “Survey on Face Recognition with pre filtering Techniques and their comparative study” 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020 10.1109/ICACCS48705.2020.9074314
38 Sundarambal B., Ramesh R., Maheswaran G.,  Devaraj D. 2020  “Recommendation system for farmers” International Journal of Advanced Science and Technology,10.3390/su12072579
39 Dhanalakshmi B., Raguraman R., Menaka R., Thandapani T. 2020  “Power management strategy and power theft detection using internet of things (Iot)” International Journal of Advanced Science and Technology,10.3390/su12072579
40 Eswara Narayanan M., Muthukumar B. 2019 “A highly secured and streamlined cloud collaborative editing scheme along with an efficient user revocation in cloud computing” Software – Practice and Experience Volume 49, Issue 12
41 Muthukumar B., Albert Mayan J., Nambiar G., Nair D. 2019 “QR Code and Biometric Based Authentication System for Trains” IOP Conference Series: Materials Science and Engineering, Volume 590, Issue 1,
42 Canessane R.A., Srinivasan N., Beuria A., Singh A., Kumar B.M. 2019 “Decentralised Applications Using Ethereum Blockchain” 5th International Conference on Science Technology Engineering and Mathematics, ICONSTEM 2019, Article number 8918887, Pages 75-79
43 Canessane R.A., Dhanalakshmi R., Muthukumar B., Sailaja C.V., Jyothi B., Dhamodaran S.
44 2019 “Diabetes to Heart Disease: A Survey”, 5th International Conference on Science Technology Engineering and Mathematics, ICONSTEM 2019, Article number 8918854, Pages 69-74
45  Sunitha P., Shunmuganathan K.L. 2019 “An agent based frequency channel assignment for wireless local area network using hypergraph T-coloring algorithm” Journal of Advanced Research in Dynamical and Control Systems
46 Beevi S.S., Shunmuganathan K.L. 2019 “Multi-operator genetic algorithm based intelligent data mining for medical database” Journal of Advanced Research in Dynamical and Control Systems Volume 11, Issue 1
47 Loheswaran, K.,  Daniya, T.,  Karthick, K. 2019 “Hybrid cuckoo search algorithm with iterative local search for optimized task scheduling on cloud computing environment” Journal of Computational and Theoretical Nanoscience, Volume 16, Numbers 5-6
48 Dr.T.P.Anithaashri “Security Enhancement for Wireless Network Communication” 2018 2nd International Conference on Trends in Electronics and Informatics (ICOEI) ,IEEE Explore, DOI: 10.1109/ICOEI.2018.8553735.
49 Vimala V., Ramar K., Ettappan M. 2018 “An Intelligent Sleep Apnea Classification System Based on EEG Signals” Journal of Medical Systems, 43(2) DOI: 10.1007/s10916-018-1146-8
50 Pavithra S., Janakiraman S. 2018 “Tamil phonemes recognition using neural networks” Journal of International Pharmaceutical Research
51 Anithaashri T.P., Ravichandran G. 2018 “Security Enhancement for Wireless Network Communication” Proceedings of the 2nd International Conference on Trends in Electronics and Informatics, ICOEI 2018
52 Anithaashri T.P., Ravichandran G., Kavuru S., Haribabu S. 2018“Secure Data Access Through Electronic Devices Using Artificial Intelligence” Proceedings of the 3rd International Conference on Communication and Electronics Systems, ICCES 2018
53 Dr.T.P.Anithaashri 2018 “Latency reduction in WTLS using game theoretical approach”, Taga Journal of Graphic technology, Volume-14-2018 – 320
54 Karthikeyan A., Rajagopal K., Mathew D.2017 “Fractional order nonlinear variable speed and current regulation of a permanent magnet synchronous generator wind turbine system”, Alexandria Engineering Journal
55 KR.Sowmia 2017 “Optimized Online Algorithm Framework for Video Services in Cloud with perfect QoE” International Journal of Advanced Research in Computer Engineering & Technology  2278 – 1323
56 B.Sundarambal 2016 “Automated System for Identification and Classification of Medical Imaging Modalities” Journal of Medical Imaging and Health Informatics Vol.6, 1-8,
57 KR.Sowmia 2015 “Carpooling System: Analysis of various techniques for fair scheduling  and trust management” International Journal of Applied Engineering Research, vol issue 10.
58 B.Sundarambal 2015 “Medical Imaging Modality Techniques: A Review” International Journal of Applied Engineering Research
59  Dr.T.P.Anithaashri 2015 “Enhancing multi-user network security using sagacity and dismissal of conquered movements” International journal on Computational and Theoretical Nanoscience,10.1166/jctn.2016.4770
Department of EEE
S. No List of Publications:
1 Ezhilmaran M,Vishnupriyan J,Ettappan M,Kirubashankar K 2021 “ Analysis of electromagnetic wave with right handed meta-Material” Journal of Computational and theoretical nano science, American scientific publishers DOI .org/10.1166/jctn.2020.9259
2 Saravanan P., Kumar N.M., Ettappan M., Dhanagopal R., Vishnupriyan J. 2020 “Effect of exhaust gas re-circulation on performance, emission and combustion characteristics of ethanol-fueled diesel engine” Case Studies in Thermal Engineering, 10.1016/j.csite.2020.100643
3 Ettappan M., Vimala V., Ramesh S., Kesavan V.T. 2020 “Optimal reactive power dispatch for real power loss minimization and voltage stability enhancement using Artificial Bee Colony Algorithm” Microprocessors and Microsystems
4 Dr. A. Srinivasan, 2019, “A Novel Technique For Stiction Detection And Compensation In Pneumatically Actuated Control Valve ” Journal of EEE, 1582-4594
5 Dr. A. Srinivasan 2020, “Optimal Design Selection And Analysis Of Single Sided Linear Induction Motor” Journal of EEE 1582-4594
6 Murugan N., Sivakumar R., Yukesh G., Vishnupriyan J.2020,” Recognition of Character from Handwritten” 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020 10.1109/ICACCS48705.2020.9074424
7 Vishnupriyan J., Raghuraman R., Ettappan M., Murugan N. 2020 “Automated detection and rescue system for road accidents “ International Journal of Control and Automation 13(2)
8 Saravanan P., Kumar N.M., Ettappan M., Dhanagopal R., Vishnupriyan J. 2020 “Effect of exhaust gas re-circulation on performance, emission and combustion characteristics of ethanol-fueled diesel engine” Case Studies in Thermal Engineering 10.1016/j.csite.2020.100643
9 Poornima j, Vishnupriyan J Vijayadhasan G.K, Ettappan M 2020” Voice assisted smart vision stick for visually impaired”  International Journal of control and automation 2020 13(2)
10 Archana N., Keerthivasan G., Janakiraman B. 2020 “SAO Filter in HEVC: A survey”  6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020 10.1109/ICACCS48705.2020.9074373
11 Krishnakumar B, Vishnu Priyan J,Chidambarathanu K,Vasudevan K R 2020 “ Experimental investigations of high efficiency smart solar tunnel dryer system” AIP Conference Proceedings 2020
12 Sudharsan G.S., Vishnupriyan J., Anand K.V. 2020 “Active flow control in Horizontal Axis Wind Turbine using PI-R controllers “ 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020
13 Rajvikram M., Vishnupriyan J. 2020 “ Coordinative control of tuned fuzzy logic and modified sliding mode controller in pmsg-based wind turbines” Lecture Notes in EEE
14 Senthil Kumar M., Vishnupriyan J., Kumar N.M. 2020 “ Model predictive control strategy-based voltage sensing of quasi Z-source cascaded multi-level PV inverter with distributed MPPT algorithm “  International Journal of Renewable Energy Research
15 Dhinakaran V., Partheeban P., Raguraman D., Shree M.V., Sai M.S. 2020 “Powering Sustainable Development Through the Integration of Teaching and Research in Engineering Education” 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020 10.1109/ICACCS48705.2020.9074449
16 Kumar N.M., Vishnupriyan J., Sundaramoorthi P. 2019 “ Techno-economic optimization and real-time comparison of sun tracking photovoltaic system for rural healthcare building “ Journal of Renewable and Sustainable Energy
17 Arun Peter. J, Keerthi Vijayadhasan. G 2019 “Design of an energy efficient campus based on  energy audit report “International Journal of Engineering & Technology
18  M.Ettappan and R.Nafeena , 2020 “Integer Linear Programming and Genetic Algorithm   (GA) for the optimum placement of phasor measuring units for smart grid” IOP Conf. Series: Materials Science and Engineering 993 (2020), 10.1088/1757-899X/993/1/012070.
19  M.Ettappan, K.Somasundaram, S.Annie Grace Vimala, V.Vimala, “Vehicle to Vehicle Charging with New Perspective for Power Transfer” Tierärztliche Praxis, ISSN: 0303-6286, Vol 40, 2020, 2025-2036.
20  V.Vimala and M.Ettappan, 2020 “A Text Based Natural Dialogue System using Entity Retrieval in News Documents”, International Journal of Control and Automation, ISSN 2005-4297,Vol. 13, No. 2, (2020), pp. 468 – 477.
21 M.Ettappan and V.Vimala, 2020 “An Intelligent Real Time Monitoring of Coal Conveyor System” , International Journal of Grid and Distributed Computing, ISSN 2005-4262,Vol. 13, No. 1, (2020), pp. 506-513.
22 S.VinothKumar J.Vishnupriyan, M.Ettappan A.Dhanasekaran”, Modeling and          Realization of Single Switch Bridgeless Sepic Converter”, International Journal of Future  Generation Communication and Networking, ISSN 22337857, Vol. 13, No. 2, (2020), pp. 317 – 325.
23 V.Vimala, M.Ettappan and K.Ramar, 2019 “An Intelligent Sleep Apnea Classification System Based on EEG Signals”,Springer, Journal of Medical Systems, ISSN 0148-5598,  vol 43, no 36 pp. 2-9.
24 AK Karmaker, M Hossain, N Manoj Kumar, J. Vishnupriyan, A Jayakumar, 2020 “Analysis of Using Biogas Resources for Electric Vehicle Charging in Bangladesh: A Techno-Economic-Environmental Perspective,” Sustainability
25 J. Vishnupriyan, A Jayakumar and KS Srinivasan, 2020 “Estimation of Daily Global Solar Radiation (DGSR) in Different Cities of Tamil Nadu,” Green Buildings and Sustainable Engineering, Springer Transactions in Civil and Environmental Engineering, Springer.
26 G. Keerthi Vijayadhasan J. Vishnupriyan, R. Raghuraman, T. Thandapani, 2020 “Techno-economic feasibility investigation on hybrid system using HOMER,” International Journal of Future Generation Communication and Networking, 13(1).
27 J. Vishnupriyan G. Keerthi Vijayadhasan, T. Thanadapani, R. Raghuraman, 2020 “Harmonic estimation using radial basis function neural network,” International Journal of Future Generation Communication and Networking, 13 (1).
28 J. Vishnupriyan, S. Vinoth Kumar, R. Raghuraman, G. Keerthi Vijayadhasan, 2020 “Comparative analysis on developments in Maximum Power Point Tracking Techniques,” International Journal of Future Generation Communication and Networking, 13 (2).
Department of ECE
S. No List of Publications:
1 Saravanan P., Kumar N.M., Ettappan M., Dhanagopal R., Vishnupriyan J. 2020 “Effect of exhaust gas re-circulation on performance, emission and combustion characteristics of ethanol-fueled diesel engine” Case Studies in Thermal Engineering, 10.1016/j.csite.2020.100643
2 Mathana J.M., Dhanagopal R., Menaka R, 2020  “VLSI Architecture for High Performance Wallace Tree Encoder”  2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020 10.1109/ICACCS48705.2020.9074395.
3 Menaka R., Dhanagopal R., Archana N. 2020 “An efficient approach for secured data aggregation against security attacks in WSN” Proceedings of the 4th International Conference on IoT in Social, Mobile, Analytics and Cloud, ISMAC 2020 10.1109/I-SMAC49090.2020.9243525
4 Manikandan K., Sivabalan A., Sundar R., Surya P.2020” A Study of Landsman, Sepic and Zeta Converter by Particle Swarm Optimization Technique” 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020
5 10.1109/ICACCS48705.2020.9074164
6 Muthukumar B., Dhanagopal R., Ramesh R.2020, “KYP modeling architecture for cardiovascular diseases and treatments in healthcare institutions”Journal of Ambient Intelligence and Humanized Computing, 10.1007/s12652-019-01653-z
7 R Dhanagopal, 2018,   Mitigating the soft errors and controlling the voltage Level of VLSI Devices-MSCV Journal of Computational and Theoretical Nanoscience,  166/jctn.2017.6618
8 Menaka R., Archana N., Dhanagopal R., Ramesh R. 2020, “Enhanced Missing Object Detection System using YOLO” 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020, 10.1109/ICACCS48705.2020.9074278
9 Narayanan L.K., Sankaranarayanan S., Rodrigues J.J.P.C., Kozlov S. 2020, “Water Demand Forecasting using Deep Learning in IoT Enabled Water Distribution Network” International Journal of Computers, Communications and Control, 10.15837/ijccc.2020.6.3977
10 Dhanagopal R., Muthukumar B.2020, “A Model for Low Power, High Speed and Energy Efficient Early Landslide Detection System Using IoT” Wireless Personal Communications, 10.1007/s11277-019-06933-7
11 Archana N., Malmurugan N.2020, “Multi-edge optimized LSTM RNN for video summarization”  Journal of Ambient Intelligence and Humanized Computing, 10.1007/s12652-020-02025-8
12 Pandimeena R., Annapoorani A., Kaviya T.D., Rajalakshimi A., Dhanagopal R. 2020,”Design and Comparison of Power, Area and Delay of 32-bit Reversible MAC unit” 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020, 10.1109/ICACCS48705.2020.9074179
13 Saravanan P., Kumar N.M., Ettappan M., Dhanagopal R., Vishnupriyan J. 2020 “Effect of exhaust gas re-circulation on performance, emission and combustion characteristics of ethanol-fueled diesel engine” Case Studies in Thermal Engineering 10.1016/j.csite.2020.100643
14 Sureshkumar R., Dhanagopal R., Menaka R., 2020 Ramesh R. “IoT based drowsiness detection, monitoring and controlling system” International Journal of Advanced Science and Technology, 10.3390/su12072579
15 Menaka R., Mathana J.M., Dhanagopal R., Sundarambal B. 2020, “Performance Evaluation of DSR Protocol in MANET Untrustworthy Environment” 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020, 10.1109/ICACCS48705.2020.9074268
16 Suvitha S., Mathana J.M. 2020, “Design of RLC Based Switching Noise Reduction Model for Low Noise Amplifier” 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020 10.1109/ICACCS48705.2020.9074343
17 Sudha Mercy S., Sivasubramanian A., Natesh B.B., Mathana J.M., Jerald Vinfrank J., Lokesh G.” Internet of Things based Smart window and Temperature Monitoring System” 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020, 10.1109/ICACCS48705.2020.9074365
18 Sundari S.M., Mathana J.M., Nagarajan T.S.2020, “Secured IoT Based Smart Greenhouse System with Image Inspection” 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020, 10.1109/ICACCS48705.2020.9074258
19 Rajalakshmi K., Niranjana P. 2020,”GSM Based Irrigation System for Monitoring Agriculture” 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020, 10.1109/ICACCS48705.2020.9074159
20 Ashlin Jinushia R., Senthilkumar S., Bhuvaneswari S., Clapton E. 2020 “Smart Monitoring System using RFID Technology “ 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020 10.1109/ICACCS48705.2020.9074448
21 Kannan R., Malathi M. 2020 “ wear me’ – GSM enabled smart device for women security”International Journal of Advanced Science and Technology
22 Saravanan P., Kumar N.M., Ettappan M., Dhanagopal R., Vishnupriyan J. 2020 “Effect of exhaust gas re-circulation on performance, emission and combustion characteristics of ethanol-fueled diesel engine” Case Studies in Thermal Engineering 10.1016/j.csite.2020.100643
23 Menaka D.R., Janarthanan D.R., Deeba D.K 2020 “ FPGA implementation of low power and high speed image edge detection algorithm”, Microprocessors and Microsystems,10.1016/j.micpro.2020.103053
24 Janarthanan, Suresh Kumar V., Praveen K., Ramesh R. 2020 “Automatic electronic secure payment in toll plaza using nfc technology” International Journal of Advanced Science and Technology 10.3390/su12072579
25 Ramesh R., Menaka R S., Kannan R., Nisha K. “Powerful spectrum aid sharing with dynamic handoff & optimized cost fixation in cognitive radio”International Journal of Advanced Science and Technology 2020 10.3390/su12072579
26 Sivabalan A., Pavithra S., Selvarani R., Vinitha K.M 2020  “Design of microstrip patch antenna for 5G” International Journal of Control and Automation,10.3390/su12072579
27 Praveen K., Rajalakshmi K., Malathi M., 2020  Dhanagopal R. “Data redundancy reduction in IoT weather station” International Journal of Control and Automation ,10.3390/su12072579
28 Pavithra S., Sivabalan A., Visvak K.T.S., Sathish K.K., Santhosh K.S. 2020 “Gateway monitoring using open WRT “ International Journal of Control and Automation 10.3390/su12072579
29 Bhuvaneswari S., Ashlin Jinushia R., Madhavan K., Thandapani T. 2020 “Automated Exterior Wall Painting Robot Using Raspberry Pi”2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020
30 10.1109/ICACCS48705.2020.9074393
31 Annapoorani A., Pandimeena R., Dhanalakshmi B.B., Amutha S. 2020 “Reduction of water consumption in agriculture smart farms based on internet of things (IoT)” International Journal of Control and Automation 10.3390/su12072579
32 Sampath T., Senthil K.G., Dhanagopal R., Pavanram 2020 “ Smart fish feeding system for aquaculture”  International Journal of Control and Automation 10.3390/su12072579
33 Archana N., Keerthivasan G., Janakiraman B. 2020 “ SAO Filter in HEVC: A survey”
34 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020 10.1109/ICACCS48705.2020.9074373
35 Pandimeena R., Annapoorani A., Mohnish K., Thanesh S. 2020 “Compare and analysis of n-bit universal shift register using reversible logic” International Journal of Control and Automation 10.3390/su12072579
36 Menaka R., Ramesh R., Dhanagopal R., Thandapani T. 2020 “Enhancement in manet performance using trust based secured anonymous routing “ International Journal of Advanced Science and Technology,10.3390/su12072579
37 Dhanalakshmi B., Raguraman R., Menaka R., Thandapani T. 2020 “ Power management strategy and power theft detection using internet of things (Iot)” International Journal of Advanced Science and Technology 10.3390/su12072579
38 Dhanagopal R., Sureshkumar R., Menaka R., Haq F.U 2020 . “Bot-te:Advanced multi-purpose land rover with image processing “ International Journal of Advanced Science and Technology 10.3390/su12072579
39 Dhinakaran V., Partheeban P., Ramesh R., Balamurali R., Dhanagopal R. 2020 “Behavior and Characteristic Changes of Generation Z Engineering Students” 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020 10.1109/ICACCS48705.2020.9074322
40 Deepa N.R., Nagarajan N., Palanivelrajan D., Balamurali R. 2020 “ Image processing system for detecting and recovering from cotton leaf disease using the android application” International Journal of Innovative Technology and Exploring Engineering 10.35940/ijitee.i8977.078919
41 Dhanagopal R., Rajeswari C., Sureshkumar R., Menaka R.2020,” FPGA Implementation of Low Power Image Compression Technique” 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020
42 10.1109/ICACCS48705.2020.9074181
43 Murugan N., Sivakumar R., Yukesh G., Vishnupriyan J.2020,” Recognition of Character from Handwritten” 2020 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020 10.1109/ICACCS48705.2020.9074424
44 Balamurali R., Maheswaran, Prashanthi A.R., Roshan Fathima S., Varshini S. 2020 “Enhanced automation using controller and conscripts” International Journal of Advanced Science and Technology 10.3390/su12072579
45 Maheswaran G., Balamurali R., Sundarambal B., Soundarya Priyadharshini S., Vinodhini P. 2020 “A smart plug for controlling and automation anywhere using IoT” International Journal of Advanced Science and Technology 10.3390/su12072579
46 Manju ,ElphinSamuel,Vishnukumar 2018, “Video restoration for H.264 using Gaussian and median filter” Journal of Advanced Research in Dynamical and control systems, 1943-023X
47 S.Harini,  I.Manju, 2018, “Multi Image Deblurring Using Complementary Sets Of Fluttering Patterns By Multiplier Method” International Research Journal of Engineering and Technology, 2395-0072
48 Balamurali R., Chandrasekar A.2018, “Multiple parameter algorithm approach for adult image identification”, Cluster Computing, 10.1007/s10586-017-1510-3
49 Vinayagam P., Anandan P. 2018, “A review on pixel performance in CMOS image sensors”, Journal of Advanced Research in Dynamical and Control Systems
50 R. Dhanagopal, V. Krishnamurthy and A. Rajaram,” A Low Power Robust Cascade Error Detection in High Level Function Verification  -RCED” International Journal of Control Theory and Application,  0974-5572
51 Menaka, R., Ranganathan, V. & Sowmya, 2017” Improving Performance Through Reputation Based Routing Protocol for Manet
52 I.Manju, 2017, “Biomedical Signal Transmission Using VLC”, International Journal on Recent and Innovation Trends in Computing and Communication, 2321-8169
53 R. Dhanagopal, V. Krishnamurthy and A. Rajaram, 2017, “Energy-efficient Devices Using a Design of Reconfigurable Robust Integrated Power Converters” International Journal of Control Theory and Application,  0974-5572
54 R.Menaka and Ranganathan, 2017,” Improving Performance Of DSR With Optimized Fuzzy Rules”, Emerging Technologies in Networking and Security (ETNS), 0976-3104
55 R. Menaka, V. Ranganathan and B. Sowmya, 2017, “Improving Performance of Fuzzy Based Routing Through Optimization for MANET”, Middle-East Journal of Scientific Research , 10.5829/idosi.mejsr.2016.24.TAET23534
56 K. Kirubasankar, Dr. A. Senthil Kumar, “Inverter Power Stage Connected with PV-Grid”, Circuits and Systems,   10.4236/cs.2016.713339
57 Rajagopal K., Guessas L., Vaidyanathan S., Karthikeyan A., Srinivasan A., 2017, “Dynamical analysis and FPGA implementation of a novel hyperchaotic system and its synchronization using adaptive sliding mode control and genetically optimized PID control” Mathematical Problems in Engineering, 10.1155/2017/7307452
58 Dr. A. Srinivasan, 2017, “Electricity Bill Conservation System for Smart Cities ”, Journal of Electronics and Communication Engineering , e-ISSN: 2278-2834,p- ISSN: 2278-8735
59 Dr. A. Srinivasan, 2017, “Design of Smart Security System using Image Processing and Embedded System” International Journal of Advanced Research in Computer and Communication Engineering, 10.17148/IJARCCE.2016.53200
60 Dr. A. Srinivasan 2017, “Smart bus ticket collecting system”, International Journal of Research and Engineering ISSN 2348-7852, ISSN 2348-7860 (Online)
61 Dr. A. Srinivasan, 2017, “Staff Scheduler Display Using C# and Arduino Interfaced with Dot Matrix Display” International Journal of Innovative Research in Computer and Communication Engineering, ISSN(Online) : 2320-9801, (Print) : 2320-9798
62 Dr. A. Srinivasan, 2017, “Wireless Information Display System with Audio Using GSM and Arduino (ATmega328p-PU)” International Journal of Innovative Research in Computer and Communication Engineering, ISSN(Online) : 2320-9801, (Print) : 2320-9798
63 R. Balamurali and A. Prasina, 2017, “Very Low Frequency Electromagnetic Field Detection”
64  Middle-East Journal of Scientific Research 23 (Sensing, Signal Processing and Security), 10.5829/idosi.mejsr.2015.23.ssps.2
65 R. Balamurali and A. Prasina, 2017, “FPGA Implementation of Adaptive Complete Synchronization Methodology for Novel Chaotic Systems”, Middle-East Journal of Scientific Research 23 (Sensing, Signal Processing and Security)
66 Manju.I , SenthilKumar.A, 2017, “A 22nm FinFET based 6TSRAM cell design with scaled supply voltage for increased read access time”Analog Integrated Circuits and Signal Processing,  10.1007/s10470-015-0547-6
67 C.Preethi I.Manju, A.Senthilkumar, 2017, “Improving Read/write Stability of SRAM based Cam using Schmitt  Trigger” International journal of applied engineering research, 0973-4562
68 R.BalaMurali, 2017,” A Statistical Algorithm For Approach For Explicit Image Discertion”, Asian journal of information technology 1682-3915
69 Balamurali R., Chandrasekar A.,2016  “A statistical algorithm approach for explicit image discretion”Asian Journal of Information Technology
70 Rameshbabu R., Karthikeyan R., Balamurali R.2016, “FPGA implementation of synchronized non identical hyperchaotic systems”
Department of Mechatronics
1 Srinivasan A., Vinoth N., Kamalesh P., Anoop A.K. 2020 “Human finger vein extraction and authentication for ATM system” International Journal of Advanced Science and Technology
2 Vinoth N., Mohanavel V.2020, “ Analysis and comparison of aluminium matrix composite in pressure vessel” International Journal on Emerging Technologies”, 10.1016/bs.coac.2020.08.009
3 Kumar, N.M., Prabaharan, N Jerin, A.R.A., Jayakumar, A.2019, “ Impact of performance degradation and capital subsidy on the revenue of rooftop PV system”, International Journal of Renewable Energy Research
4 Gangwar P., Kumar N.M., Singh A.K., Jayakumar A., Mathew M.2019, “ Solar photovoltaic tree and its end-of-life management using thermal and chemical treatments for material recovery” , Case Studies in Thermal Engineering, 10.1016/j.csite.2019.100474
5  Jayakumar A.2019, “A comprehensive assessment on the durability of gas diffusion electrode materials in PEM fuel cell stack”, Frontiers in Energy, 10.1007/s11708-019-0618-y
 Department science and Humanities:
1 Prabhu S., Murugan G., Arockiaraj M., Arulperumjothi M., Manimozhi V.2020, “Molecular topological characterization of three classes of polycyclic aromatic hydrocarbons, Journal of Molecular Structure, 10.1016/j.molstruc.2020.129501
2 Ajitha A., Kumar N.M., Jiang X.X., Reddy G.R., Jayakumar A., Praveen K., Anil Kumar T.2020 ” Underwater performance of thin-film photovoltaic module immersed in shallow and deep waters along with possible applications Results in Physics” 10.1016/j.rinp.2019.102768
3 A. Kavithaa, 2020, “Synthesis and characterization of tritendate Schiff base rare earth nano metal complexes” Materials Today: Proceedings – Journal – Elsevier, ISSN: 2214-7853
4 A. Kavithaa, 2020, “Aminoacid Schiff base Fabricated Glassy carbon Electrode for Efficient Sensing of Zinc, Copper,Mercury ions in Water” , Material Science and Engineering, ISSN: 0928-4931
5 Y Geetha, 2020, “Ultrasound wave as a tool for assessing molecular interactions of the ternary liquid mixture of p-anisaldehyde with dimethylamine in n-hexane medium at different temperatures through the concept: Correlation of experimental velocities with calculated velocities based on certain theories” International journal of Advanced Scientific Research , ISSN-2456-0421
6 O.S. Rajamohan, 2020, “Synthesis and emission properties of Y2Si2O7:Eu3+ phosphor”
7 G Murugan, 2020, “On certain distance and degree based topological indices of Zeolite LTA frameworks” Material Research Express, ISSN: 20531591
8 G Murugan, 2020, “On the Edge-version of Topological Indices of Titanium Dioxide Nanotube and Nanosheet” Nanoscience & Nanotechnology-Asia, ISSN : 22106812
9 Vincent Joseph, K.L. Mary Rosana, N.T. Easwaramoorthi, R.d, Judith Vijaya, J. Karthikeyan, S. Kim, J.2019, “Output current enhancement of hexylthiophene functionalized D-π-extended-A triphenylamine in dye sensitized solar cells New Journal of Chemistry, 10.1039/c9nj01970g
10 Mallick A., Laskar A., Adhikari R., Roy S., 2018, “Redox reaction Triggered nanomotors based on soft-oxometalates with high and sustained motility” Frontiers in Chemistry, 10.3389/fchem.2018.00152
11 Rajamohan O.S., Ponnusamy V.2018,” Synthesis and emission properties of Y2Si2O7:Eu3+ phosphor” Materials Research Innovations, 10.1080/14328917.2018.1503799
DEPARTMENT OF MECHANICAL ENGINEERING
1 Jayapalan S., Bapu B.R.R., Kumar S.D., Kanishkar S.M., Venugopal J., Mariadhas A., Subbiah G. 2020 “ Impact of nano additives in di diesel engine to investigate performance and emission characteristics by using biodiesel blended with diesel” AIP Conference Proceedings,
2 Jayapalan S., Bapu B.R.R., Kalaiyarasan, Hemanthkumar P., Venugopal J., Mariadhas A., Sivasaravanan S. 2020 “Experimental investigation on emission reduction in diesel engine by using biodiesel with catalytic converter”,AIP Conference Proceedings, ,10.1063/5.0034645
3 Jayapalan S., Bapu B.R.R., Kumar S.D., Kanishkar S.M., Venugopal J., Mariadhas A., Subbiah G.2020, “Impact of nano additives in di diesel engine to investigate performance and emission characteristics by using biodiesel blended with diesel ” AIP Conference Proceedings, 10.1063/5.0034641
4 Jayapalan S., Bapu B.R.R., Syed Khalid P., Sharuhan M., Venugopal J., Mariadhas A., Kachupalli S.R.S.R., 2020“Emission examination in diesel engine by using biodiesel fuel with electrochemical activated cell catalytic converter” ,AIP Conference Proceedings,2020,10.1063/5.0034637
5 Sukumar T., Ramesh Bapu B.R., Durga Prasad B. 2020 “Numerical analysis and experimental evaluation of rubber boot design Engineering Failure Analysis” 10.1016/j.engfailanal.2020.104867
6 Sukumar T., Ramesh Bapu B.R., Durga Prasad B. “Prediction of hyperelastic material sealing pressure using experimental and numerical analyses “,Journal of Elastomers and Plastics,10.1177/0095244319891211
7 Sivarethinamohan S., Sivarethinamohan R., Baskaran A., Ramakrishnan D 2020 “Rational suitability of low cost activated carbon in removing hexavalent chromium ions from wastewater by uninterrupted mode of adsorption”,IOP Conference Series: Materials Science and Engineering 10.1088/1757-899X/955/1/012087
8 Sadasivan N., Balasubramanian M., Rameshbapu B.R 2020 “A comprehensive review on equal channel angular pressing of bulk metal and sheet metal process methodology and its varied applications” .Journal of Manufacturing Processes 10.1016/j.jmapro.2020.10.032
9 Janarthanan R., Doss S., Baskar S 2020 “Optimized unsupervised deep learning assisted reconstructed coder in the on-nodule wearable sensor for human activity recognition.Measurement”  Journal of the International Measurement Confederation, 10.1016/j.measurement.2020.108050
10 Kishore R., Karthikeyan K., Karthick G., Raja Rasalnath S. 2020 ,Comparative analysis on mechanical behavior of coir fiber composite by varying the fiber length and composition of filler materials,AIP Conference Proceedings,10.1063/5.0025410
11 Dinesh D., Nagendharan S., Diwakar Raviram R. 2020 “Design and performance analysis of curved fins with convex inner flow surface”AIP Conference Proceedings 10.1063/5.0025508
12 Kannan G.K., Nagendharan S., Krishnamoorthi S. 2020 Performance improvement in compact single cylinder IC engines for fuel efficient racing application ,AIP Conference Proceedings,10.1063/5.0028764
13 Ramesh Bapu B.R., Vijayakumar M.D. 2020  “Proceedings of International Conference on Recent Trends in Mechanical and Materials Engineering ICRTMME ,AIP Conference Proceedings,10.1063/12.0001159
14 Suresh A., Deepak Suresh Kumar R., Mohamed Jaasim H., Tamilarasan B., Mugilvarnan N., Vignesh A. 2020,Buckling analysis of 3D printed ABS thin cylinder at different percentage of infill’s,AIP Conference Proceedings10.1063/5.0025512
15 Partheeban P., Palani Kumar E., Breetha Y.J., Bazeem M. 2020 “Analysis of geofabrics in highway pavement materials”AIP Conference Proceedings 10.1063/5.0025155
16 Suresh A., Dhinakaran V., Kalidasan K., Surya S., Varsha Shree M. 2020 “Tensile analysis of 3D printed thin cylinder at different percentage of infill’s,AIP Conference Proceedings,10.1063/5.0025516
17 Kishore R., Sivaraj S., Karthikeyan K., Kathick G. 2020  “Design optimization and analysis of rear knuckle of ATV to reduce the manufacturing complexity and to improve strength” AIP Conference Proceedings,10.1063/5.0025408
18 Dhanasekaran A., Kumaraswamy S. 2020 “Experimental evaluation of affinity law of pumps by using multistage electric submersible pump at various speeds of operation” AIP Conference Proceedings,10.1063/5.0024932
19 Suresh A., Ramesh Bapu B.R., Ragalakshmi S., Prince Packiyaraj P., Adharsh S., Abul Kalam Azad A. 2020 “Improving and standardization of industrial workers related to cognitive ergonomics”AIP Conference Proceedings,10.1063/5.0025513
20 Kishore R., Yuwaraj K.R., Vinoth N., Kannan P. 2020 “Designing an optimized model of water lifting device without conventional practices”,AIP Conference Proceedings 10.1063/5.0025409
21 Veera Kishore C.H., Dhinakaran V., Jagadeesha T. 2020 “Study and analysis of stress and pressure variations on Indian railway wheel”AIP Conference Proceedings 10.1063/5.0024912
22 Rashid M., Dhinakaran V., Jagadeesha T. 2020 “Topology optimization of rigid flanged couplings using finite element analysis”AIP Conference Proceedings,10.1063/5.0024913
23 Prajwal S., Dhinakaran V., Jagadeesha T. 2020 “ Size optimization of shoulder filleted shafts with relief grooves for improving their fatigue life”AIP Conference Proceedings,10.1063/5.0024911
24 Manimaran M., Sakthi Balan G., Ravichandran M., Mohanavel V., Dhinakaran V. 2020  “Performance, emission analysis and optimization of biodiesel blend with CuO nano particle additive in di diesel engine” AIP Conference Proceedings 10.1063/5.0024978
25 Janaki Manohar N., Muthu Krishnan N., Rahul Kumar A. 2020  “Enhanced ergonomic design of driver seat”AIP Conference Proceedings10.1063/5.0026898
26 Agarwal R., Dhinakaran V., Jagadeesha T. 2020 “Fatigue analysis of similar and dissimilar spot welds”AIP Conference Proceedings10.1063/5.0024909
27 Saji N., Dhinakaran V., Jagadeesha T. 2020 “Finite element analysis of strength of different non-permanent joints subjected to eccentric loading”AIP Conference Proceedings 10.1063/5.0024910
28 Prabaharan T., Periasamy P., Mugendiran V., Varsha Shree M. 2020 “Influence of image pixels and image contrasts in computing 2D geometrical properties using MATLAB” AIP Conference Proceedings, 10.1063/5.0025041
29 Karthikeyan I., Dhinakaran V., Rajkumar V. 2020 “Evaluation of mechanical properties of aluminium 6063-Borosilicate reinforced metal matrix composite”AIP Conference Proceedings, 10.1063/5.0025114
30 Mohan E., Mamundi Azaath L., Marichamy S., Dhinakaran V. 2020 “The effect of impact damper on vibration control in internal turning operation”AIP Conference Proceedings,10.1063/5.0025023
31 Lokeshkumar J., Ramasamy N., Bak K.M. 2020, “Compressive response on Kevlar hybrid composite pipe under sea water environment”AIP Conference Proceedings 10.1063/5.0025018
32 Balasubramanian M., Radhakrishnan S., Rameshbapu B.R., Nagaraja A. 2020 “A case study on failure analysis of fender mounting bracket of tractors by DMAIC approach in Southern India”AIP Conference Proceedings, 10.1063/5.0024886
33 Krishna Kumar B., Vishnupriyan J., Chidambarathanu K., Vasudevan K.R. 2020 “Experimental investigations of high efficiency smart solar tunnel dryer system”  AIP Conference Proceedings 10.1063/5.0024997
34 Mohanavel V., Suresh Kumar S., Ganeshan P., Vishnukumar R., Gurusamy P. 2020 “Physical, mechanical and wear performance of graphite (Gr) particles incorporated aluminium matrix composites-An overview” AIP Conference Proceedings 10.1063/5.0025354
35 Sathish T., Muthukumar K., Saravanan R., Dhinakaran V. 2020 “Investigation on waste tyre oil with diesel for detection of density, kinematic and dynamic viscosities evaluation of various combinations in volume basis” AIP Conference Proceedings,10.1063/5.0024963
36 Sathish T., Bala Subramanian D., Saravanan R., Dhinakaran V. 2020 “Experimental investigation of temperature variation on flat plate collector by using silicon carbide as a nanofluid” AIP Conference Proceedings  10.1063/5.0024965
37 Sathish T., Arunkumar S., Saravanan R., Dhinakaran V. 2020 “Experimental investigation on material characterization of zirconia reinforced Alumina ceramic composites via powder forming process” AIP Conference Proceedings  10.1063/5.0024964
38 Sathish T., Muthukumar K., Saravanan R., Dhinakaran V. 2020 “Study on temperature difference of aluminium nitride nanofluid used in solar flat plate collector over normal water “ AIP Conference Proceedings , 10.1063/5.0024966
39 Dhandapani N.V., Dhinakaran V., Krishnakumar K., Rajkumar V. 2020 “Transient thermal finite element simulation of moving gas tungsten arc welding on AISI 4340 aeronautical steel” AIP Conference Proceedings  10.1063/5.0025111
40 Saravanan S., Jayasuthahar S.T., Dhinakaran V., Sankar S. 2020 “Tribological characteristics of TiO2particles reinforced aluminum nanocomposites produced via liquid metallurgy techniques with ultrasonic vibrator” AIP Conference Proceedings,10.1063/5.0024981
41 Stalin B., Ravichandran M., Marichamy S., Choumya Devi T.D., Alagarsamy S.V., Dhinakaran V. 2020 “Friction welding parametric optimization of AISI 310L austenitic stainless steel weld joints-Grey relational investigation”AIP Conference Proceedings,10.1063/5.0024979
42 Sathish T., Subramanian D.B., Saravanan R., Dhinakaran V. 2020 “Experimental study about flash and fire point comparison on three combinations of waste tyre oil with diesel for alternate fuel properties identification” ,AIP Conference Proceedings,10.1063/5.0024958
43 Gurusamy P., Balasivanandha Prabu S., Nagasankar P., Muthuraman V., Mohanavel V. 2020 “Solidification behaviour of squeeze cast aluminium composites”  AIP Conference Proceedings 10.1063/5.0025429 Vishnu Vardhan T., Stalin B., Marichamy S., Ravichandran M., Vairamuthu J., Dhinakaran V. 2020Material synthesis, characterization and machining performance of terbium metal matrix composite,AIP Conference Proceedings,10.1063/5.0024969
44 Stalin B., Vishnu Vardhan T., Marichamy S., Vairamuthu J., Ravichandran M., Dhinakaran V. 2020 “Investigations on ultrasonic machining of tellurium copper metal matrix “ AIP Conference Proceedings  10.1063/5.0024967
45 Muthukumaran K., Francis Xavier J., Ramadoss R., Balu P., Ezilarasan C. 2020 “Analysis of Thermal Barrier Coating’s Behaviors on Alloys – A Review” IOP Conference Series: Materials Science and Engineering, 10.1088/1757-899X/954/1/012025
46 Menaka R., Dhanagopal R., Archana N. 2020 “An efficient approach for secured data aggregation against security attacks in WSN”
47 Proceedings of the 4th International Conference on IoT in Social, Mobile, Analytics and Cloud, ISMAC 10.1109/I-SMAC49090.2020.9243525
48 Franklin R.G., Muthukumar B. 2020 “Detection of diabetes mellitus using machine learning algorithms” International Journal of Research in Pharmaceutical Sciences 10.26452/ijrps.v11i4.3662
49 Anand S.A.A., George K., Thomas N.S., Kabilan S.2020 “Synthesis, characterization and antitumor activities of some novel thiazinones and thiosemicarbazones derivatives Phosphorus, Sulfur and Silicon and the Related Elements”10.1080/10426507.2020.1757672
50 Saravanan P., Kumar N.M., Ettappan M., Dhanagopal R., Vishnupriyan J. 2020 “Effect of exhaust gas re-circulation on performance, emission and combustion characteristics of ethanol-fueled diesel engine” Case Studies in Thermal Engineering 10.1016/j.csite.2020.100643
51 Ramakrishnan B., Durdu A., Rajagopal K., Akgul A. 2020  “Infinite attractors in a chaotic circuit with exponential memristor and Josephson junction resonator” AEU – International Journal of Electronics and Communications,10.1016/j.aeue.2020.153319
52 Dhanasekaran A., Kumaraswamy S. 2020 “Pressure pulsation in stages of electric submersible pump at shut- off under various speeds”
53 Paiguan Jixie Gongcheng Xuebao/Journal of Drainage and Irrigation Machinery Engineering ,10.3969/j.issn.1674-8530.19.0276
54 Selvaraj P., Narayanan L.K. 2020 “Iot enhanced smart mirror for personal and commercial applications”International Journal of Advanced Trends in Computer Science and Engineering, 10.30534/ijatComputer science and engineering /2020/311942020
55 Narayanan L.K., Sankaranarayanan S., Rodrigues J.J.P.C., Lorenz P. 2020 “Multi-agent-based modeling for underground pipe health and water quality monitoring for supplying quality water” International Journal of Intelligent Information Technologies,10.4018/IJIIT.2020070103
56 George K., Thomas N.S., Malathi R. 2020 “4,4′-Diisothiocyanatostilbene-2,2′-disulfonate modulates voltage-gated K+ current and influences cell cycle arrest in androgen sensitive and insensitive human prostate cancer cell lines” Toxicology Mechanisms and Methods,10.1080/15376516.2020.1745343
57 Menaka D.R., Janarthanan D.R., Deeba D.K 2020 “ FPGA implementation of low power and high speed image edge detection algorithm”.
58 Microprocessors and Microsystems,10.1016/j.micpro.2020.103053
59 Anuradha B., Packialakshmi S., Nagamani K., Sarala Devi J. 2020  “Statistical study of water users association for sustainable agriculture in rural development” Journal of Green Engineering,10.1063/5.0024821
60 Mary Rosana N.T., Joshua Amarnath D., Senthil Kumar P., Vincent Joseph K.L. 2020 “Potential of plant-based photosensitizers in dye-sensitized solar cell applications” Environmental Progress and Sustainable Energy,10.1002/ep.13351
61 Prabhu S., Murugan G., Cary M., Arulperumjothi M., Liu J.-B. 2020 “On certain distance and degree based topological indices of Zeolite LTA frameworks”Materials Research Express  10.1088/2053-1591/ab8b18
62 Karmaker A.K., Hossain M.A., Kumar N.M., Jagadeesan V., Jayakumar A., Ray B. 2020 “Analysis of using biogas resources for electric vehicle charging in Bangladesh: A techno-economic-environmental perspective”.Sustainability (Switzerland),10.3390/su12072579
63 Rajalakshmi K., Niranjana P., Praveen K., Ramesh R. 2020  “Clustering for extenuating the safety patron toss “International Journal of Control and Automation 10.3390/su12072579
64 Senthil K.G., Sampath T., Mohan R.M., Muthu V.N. 2020 “Hand recognition and gesture control using neural networks” International Journal of Control and Automation 10.3390/su12072579
65 Vijayaganapathy D., Rajarasalnath S., Kannan P., Dhivakar R.R.P. 2020  “Parametric analysis and designing of wind mill blade”International Journal of Control and Automation 10.3390/su12072579
66 Kishore R., Dhinakaran V., Karthick G., Vijayakumar M.D. 2020 “Comparative analysis using finite element methods and traditional method of natural composite hybrid particulate coir polyester with fillers red mud and egg shell” International Journal of Control and Automation 10.3390/su12072579
67 Shanmuga Selvam P., Robin Yogaraj J., Solomon Paul Raj I.D., Dhinakaran V. 2020   “Fabrication and characterization of aluminium and carbon fiber laminate composite” International Journal of Advanced Science and Technology 10.3390/su12072579
68 Dhinakaran V., Varsha Shree M., Raguraman D., Shanmuga Selvam P. 2020 “Analysis of pillion displacement during impact in monosuspension bike” International Journal of Advanced Science and Technology 10.3390/su12072579
69 Raguraman D., Dhanalakshmi B., Dhinakaran V., Vijayakumar M.D. 2020 “Adaptive ann-pso algorithm on tensile stress prediction for the dissimilar fsw butt joints of aa6061-az61 alloy” International Journal of Advanced Science and Technology,10.3390/su12072579
70 Gokulakrishnan S., Ramesh Bapu B.R., Ravinder R., Karthik G. 2020 “Fabrication of polymer matrix reinforced composite by using bio waste materials” International Journal of Advanced Science and Technology,10.3390/su12072579
71 Ganesh V., Pandikumar A., Alizadeh M., Kalidoss R., Baskar K. 2020 “Rational design and fabrication of surface tailored low dimensional Indium Gallium Nitride for photoelectrochemical water cleavage” International Journal of Hydrogen Energy,10.1016/j.ijhydene.2020.01.048
72 Dhinakaran V., Partheeban P., Raguraman D., Shree M.V., Sai M.S. 2020 “Powering Sustainable Development Through the Integration of Teaching and Research in Engineering Education” 6th International Conference on Advanced Computing and Communication Systems, ICACCS 10.1109/ICACCS48705.2020.9074449
73 Vijayakumar M.D., Dhinakaran V., Dhanalakshmi B., Bupathi Ram P.M., Surendar K. 2020 “Nourishing Indian Economy-through Curriculum Change in Rural Schools” 6th International Conference on Advanced Computing and Communication Systems, ICACCS 2020
74 Senthil kumar J., Ramesh Bapu B.R., Gugan R. 2020 “Emission examination on nanoparticle blended diesel in constant speed diesel engine
75 Petroleum Science and Technology” 10.1080/10916466.2019.1683579
76 Dhinakaran V., Vigneswari K., Lavanya M., Varsha Shree M 2020 “Point-of-care applications with graphene in human life”.Comprehensive Analytical Chemistry,10.1016/bs.coac.2020.08.009
77 Dhinakaran V., Kumar K.P.M., Ram P.M.B., 2020 Ravichandran M., Vinayagamoorthy M. “A review on recent advancements in fused deposition modelling” Materials Today: Proceedings 10.1016/j.matpr.2019.12.036
78 Dhinakaran V., Surendar K.V., Riyaz M.S.H., Ravichandran M. 2020 “Review on study of thermosetting and thermoplastic materials in the automated fiber placement process” Materials Today: Proceedings 10.1016/j.matpr.2019.12.355
79 Dhinakaran V., Shriragav S.V., Fahmidha A.F.Y., Ravichandran M. 2020 “A review on the categorization of the welding process of pure titanium and its characterization” Materials Today: Proceedings 10.1016/j.matpr.2019.12.034
80 Dhinakaran V., Gokhulabalan B., Rahul Kumar A., Ravichandran M. 2020 “ Advancement in materials for industrial safety helmets”Materials Today: Proceedings 10.1016/j.matpr.2019.12.197
81 Dhanasekaran A., Kumaraswamy S. 2020 “Study of pulsation pressures in the stages of an electric submersible pump at shut-off under various speeds of operation “ Recent Patents on Mechanical Engineering,10.2174/2212797613666200220141119
82 Dhinakaran V., Lavanya M., Vigneswari K., Ravichandran M., Vijayakumar M.D. 2020 “Review on exploration of graphene in diverse applications and its future horizon”Materials Today: Proceedings 10.1016/j.matpr.2019.12.369
83 Somasundaram S., Ramesh Bapu B.R., Raj Jawahar R. 2020 “Tribological characteristics of n-(GO/WC-10Co-4Cr) HVOF coatings under biolubricant conditions” Surface Engineering 10.1080/02670844.2020.1762467
84 Ramesh Bapu B.R., Senthil kumar J., Shinde Y.N., Skaria D.A. 2020 “Emission investigation of VCR diesel engine by TiO2 nanocatalyst and Jamun biodiesel blended with diesel” International Journal of Ambient Energy,10.1080/01430750.2020.1758784
85 Chalawadi D., Babu S.P.K., Dhinakaran V. 2020 “Experimental investigation of TIG welded additive manufactured inco-718 sheets” Materials Research 10.1590/1980-5373-MR-2020-0076
86 Varsha Shree M., Dhinakaran V., Rajkumar V., Bupathi Ram P.M., Vijayakumar M.D., Sathish T. 2020 “Effect of 3D printing on supply chain management” Materials Today: Proceedings 10.1016/j.matpr.2019.09.060
87 Ashraff Ali K.S., Nirmal Kumar R., Amjath Z.A., Raman M., Vinayagam M. 2020 “Emission investigation on the effect of ultrasonic irradiation in neat biodiesel fuelled engine” International Journal of Ambient Energy 10.1080/01430750.2020.1722233
88 Veerappan G., Ravichandran M., Meignanamoorthy M., Mohanavel V. 2020 “Characterization and Properties of Silicon Carbide Reinforced Ni-10Co-5Cr (Superalloy) Matrix Composite Produced Via Powder Metallurgy Route Silicon”10.1007/s12633-020-00455-9
89 Jayapalan S., Bapu B.R.R., Kumar S.D., Kanishkar S.M., Venugopal J., Mariadhas A., Subbiah G.2020“Impact of nano additives in di diesel engine to investigate performance and emission characteristics by using biodiesel blended with diesel”, AIP Conference Proceedings, 10.1063/5.0034641
90 Stalin B., Ravichandran M., Mohanavel V., Raj L.P. 2020 “Investigations into microstructure and mechanical properties of Mg-5wt. %Cu-TiB2 composites produced via powder metallurgy route” Journal of Mining and Metallurgy, Section B: Metallurgy 10.2298/JMMB190315047S
91 Dhinakaran V., Varsha Shree M., Jagadeesha T., Bupathi Ram P.M., Sathish T., 2020 “ Stalin B. A review on the recent developments in modeling heat and material transfer characteristics during welding” Materials Today: Proceedings 10.1016/j.matpr.2019.08.079
92 Swapna Sai M., Dhinakaran V., Manoj Kumar K.P., Rajkumar V., Stalin B., Sathish T. 2020 “A systematic review of effect of different welding process on mechanical properties of grade 5 titanium alloy” Materials Today: Proceedings10.1016/j.matpr.2019.09.027
93 Rajan K., Rajaram Narayanan M., Suresh Kumar S., Parthasarathi R., Mohanavel V. 2020 “A detailed study on improving the properties and performance aspects of biodiesel” International Journal of Ambient Energy 10.1080/01430750.2020.1725634
94 Rajan K., Rajaram Narayanan M., Ashraff Ali K.S., Prasanna B., Vinayagam M. 2020 “Analysis on the properties and emission characteristics of corn biodiesel subjected to improved transesterification” International Journal of Ambient Energy 10.1080/01430750.2020.1719888
95 Dhinakaran V., Ajith J., Fathima Yasin Fahmidha A., Jagadeesha T., Sathish T., Stalin B. 2020 “Wire Arc Additive Manufacturing (WAAM) process of nickel based superalloys-A review”  Materials Today: Proceedings 10.1016/j.matpr.2019.08.159
96 Nagesha B.K., Dhinakaran V., Varsha Shree M., Manoj Kumar K.P., Chalawadi D., Sathish T. 2020 “Review on characterization and impacts of the lattice structure in additive manufacturing”  Materials Today: Proceedings 10.1016/j.matpr.2019.08.158
97 Veeman D., Shanmugam N.S., Sathish T., Petle V., Sriram G. 2020 “Experimental investigation of plasma arc welded Ti-6Al-4V sheets
98 Transactions of the Canadian Society for Mechanical Engineering” 10.1139/tcsme-2019-0149
99 Ashraff Ali K.S., Ramakrishnan C., Parthasarathi R., Inigo C., Vinayagam M. 2020 “Emission examination of lemongrass biodiesel and novel nanoparticle blends in research diesel engine” International Journal of Ambient Energy 10.1080/01430750.2020.1722235
100 Mohanavel V., Ravichandran M., Suresh Kumar S., Melwin Jagadeesh Sridhar M., Dineshkumar S., Pavithra M.M. 2020 “Microstructural and tribological characterization of Al/egg shell ash composites prepared by liquid metallurgy process”,Journal of the Balkan Tribological Association 10.3390/su12072579
101 Jayabalakrishnan D., Saravanan K., Ravi S., Prabhu P., Maridurai T., Prakash V.R.A. 2020 “Fabrication and Characterization of Acrylonitrile Butadiene Rubber and Stitched E-Glass Fibre Tailored Nano-Silica Epoxy Resin Composite Silicon”10.1007/s12633-020-00612-0
102 Karthigairajan M., Nagarajan P.K., Raviraja Malarvannan R., Ramesh Bapu B.R., Jayabalakrishnan D., Maridurai T., Shanmuganathan V.K. 2020  “Effect of Silane-Treated Rice Husk Derived Biosilica on Visco-Elastic, Thermal Conductivity and Hydrophobicity Behavior of Epoxy Biocomposite Coating for Air-Duct Application Silicon” 10.1007/s12633-020-00772-z
103 Rajagopal K., Nazarimehr F., Karthikeyan A., Srinivasan A., Jafari S. 2020 “CAMO: Self-Excited and Hidden Chaotic Flows” International Journal of Bifurcation and Chaos 10.1142/S0218127419501438
104 Yuvaraja S., Arunkumar G., Venu Sai B., Rajan P., Dhinakaran V. 2020 “Design and development of a compliant clutch fork using topology optimization” International Journal of Innovative Technology and Exploring Engineering 10.35940/ijitee.K2539.0981119
105 Kumar J.S., Bapu B.R.R. 2020 “Comparision of performance and emission characteristics of dl diesel engine by using ajwain and cinnamon biodiesel blend with diesel” Indian Journal of Environmental Protection 10.3390/su12072579
106 Jayapriya J., Muruganandam D., Raguraman D., Senthilkumar B., Dhinakaran V. 2020 “Design and fabrication of multi-rotor horizontal axis wind turbine “ International Journal of Engineering and Advanced Technology 10.35940/ijeat.F9528.088619
107 Gunasekar P., Manigandan S., Gokulnath R., Venkatesh S., Rakesh Vimal M., Booma Devi P., Dhinakaran V. 2020 “Effect of carbon nanotubes on sheet molding composite analysis for automotive application: FEA method” International Journal of Innovative Technology and Exploring Engineering 10.35940/ijitee.i8978.078919
108 Shanmugaselvam P., Sivaraj S., Subash P. 2020 “Investigating the wear and hardness of aluminium LM25 alloy reinforced with nano Al2O3 and nano TiB2” Materials Today: Proceedings 10.1016/j.matpr.2019.05.205
109 Arumugam D., Sivasailam K. 2020 “Investigation of pressure pulsation in the stages of an electric submersible pump at best efficiency point under various speeds”ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019 10.1115/AJKFluids2019-5081
110 Arunkumar M., Dhinakaran V., Siva Shanmugam N. 2020 “Numerical prediction of temperature distribution and residual stresses on plasma arc welded thin titanium sheets” International Journal of Modelling and Simulation 10.1080/02286203.2019.170008
111 Senthil Kumar J., Ramesh Bapu B.R., Sivasaravanan S., Prabhu M., Muthu Kumar S., Abubacker M.A. 2020 “Experimental studies on emission reduction in a DI diesel engine by using a nano catalyst coated catalytic converter” International Journal of Ambient Energy10.1080/01430750.2019.1694584
112 Senthil Kumar J., Ramesh Bapu B.R. 2020 “Cerium oxide nano additive impact of VCR diesel engine characteristics by using Ginger grass oil blended with diesel” International Journal of Ambient Energy 10.1080/01430750.2019.1653975
113 Dattatreya V., Ramesh Bapu B.R., Durga Prasad B. 2020 “Study of combustion characteristics on single cylinder direct injection diesel engine with plasma and HVOF coated ceramic powders on piston crown” Materials Today: Proceedings 10.1016/j.matpr.2019.05.137
114 Arunkumar M., Dhinakaran V., Sivashanmugam N., Petley V. 2020 “Effect of plasma Arc welding on residual stress and distortion of thin titanium sheet “ Materials Research 10.1590/1980-5373-MR-2019-0366
115 Anand K.T., Rajan A.J., Bapu B.R.R  2020  “Development of a method to compute the overall key performance index for a spinning mill  to aid supply chain management” Fibres and Textiles in Eastern Europe 10.5604/01.3001.0013.2363
116 Kumar L.S., Bapu B.R.R., Prakash R. 2020 “ exhaust gas temperature on emissions in CI engine fuelled with Calophyllum inophyllum methyl ester blends with diesel” Progress in Industrial Ecology 10.1504/PIE.2019.100891
117 S.Krishnan, K.Pradeepa, P.Thirumal 2019 “Open Loop And Closed Loop Analysis Of Interleaved Converter For Solar Power Generation Systems” International Journal of Mechanical Engineering and Technology (IJMET) ISSN Print:0976 – 6340, Online:0976 – 6359
118 Krishnamoorthi, S.,  Nagendharan, S.,  Manikandan, G.,  Karthikeyan, R. 2019 “Studies on mechanical and thermal bheviours of nano clay filled linear low density polyethylene composites”International Journal of Recent Technology and Engineering
119 Kumar N.M., Gupta R.P., Mathew M., Jayakumar A., Singh N.K. 2019 “Performance, energy loss, and degradation prediction of roofintegrated crystalline solar PV system installed in Northern India” Case Studies in Thermal Engineering
120 Rajagopal K., Vaidyanathan S., Karthikeyan A., 2018 Duraisamy P. “Erratum to: Dynamic analysis and chaos suppression in a fractional order brushless DC motor(Electr Eng, 10.1007/s00202-016-0444-8)
121 Rajagopal K., Vaidyanathan S., Karthikeyan A., Duraisamy P. 2018 “Dynamic analysis and chaos suppression in a fractional order brushless DC motor”
122 Kishore R., Karthick G., Vijayakumar M.D., Dhinakaran V. 2019”Analysis of mechanical behaviour of natural filler and fiber based composite materials” International Journal of Recent Technology and Engineering
123 Krishnamoorthi S., Dinesh D., Karthikeyan R., Manikandan G. 2019 “Heat treatment parameters to optimize hardness behavior of carbon steel using taguchi technique” International Journal of Recent Technology and Engineering
124 Gowda T., Jagadeesha T., Dhinakaran V. 2019 “Optimization of design parameters of aircraft wing structure with large cut outs using damage tolerant design and finite element analysis approach “ International Journal of Recent Technology and Engineering
125 Vijayakumar M.D., Gopalaramasubramaniyan G., Dhinakaran V. 2019 “Microstructural investigation of is513cr3 by comparing with plain coolant, ice, Ln2 gas in single point incremental forming” International Journal of Recent Technology and Engineering
126 Vijayakumar M.D., Gopalaramasubramaniyan G., Dhinakaran V. 2019 “Microstructural investigation of is513cr3 by comparing with plain coolant, ice, Ln2 gas in single point incremental forming” International Journal of Recent Technology and Engineering
127 Sriram G., Dhinakaran V., Jagadeesha T., Ramgopal R. 2019 “Finite element simulation of temperature distribution and residual stress in single bead on plate weld trial using double ellipsoidal heat source model” International Journal of Recent Technology and Engineering
128 Jaiganesh V., Ravi Raja Malarvannan R., Manikandan G., Krishnamoorthi S. 2019 “Investigation of the mechanical properties of natural fiber reinforced composites of morinda citrifolia with epoxy and bisphenol resin” International Journal of Recent Technology and Engineering
129 Ajay M., Kannan S., Prem Narayan P., Deepak Suresh Kumar R. 2019 “A Glance Through History of Automobile Industry and Current Market Study of Some of the Legendry Models in India” Lecture Notes in Mechanical Engineering 10.1007/978-981-13-6374-0_49
130 Illyas S.M., Bapu B.R.R., Rao V.V.S. 2019 “Experimental analysis of heat transfer and multi objective optimization of swirling jet impingement on a flat surface” Journal of Applied Fluid Mechanics 10.29252/JAFM.12.03.29172
131 Shanmugaselvam P., Sasikumar R., Sivaraj S. 2019 “Investigation of Hardness and Tribological Behaviour of Aluminium Alloy LM30 Reinforced with Silicon Carbide, Boron Carbide and Graphite” Lecture Notes in Mechanical Engineering 10.1007/978-981-13-6374-0_62
132 Binoj J.S., Bibin J.S. 2019 “Failure analysis of discarded Agave tequilana fiber polymer composites” Engineering Failure Analysis
133 10.1016/j.engfailanal.2018.09.019
134 Sukumar T., Ramesh Bapu B.R., Durga Prasad D. 2019 “Numerical and Experimental Evaluation of Hyperelastic Material Parameters” Lecture Notes in Mechanical Engineering 10.1007/978-981-13-1780-4_47
135 Stephen Bernard S., Javeed Ahmed M., Dasaprakash J., Saroj Nitin M.R., Vivek S., Kannan G.K. 2019 “Friction and Wear Properties of Bio-Based Abrasive in a High-Friction Composite Material” Lecture Notes in Mechanical Engineering 10.1007/978-981-13-6374-0_63
136 Sukumar T., Ramesh Bapu B.R., Durga Prasad B., Vijay Prithiv B.R. 2019 “Numerical Analysis and Design Optimization of Lip Seal Opening Pressure for Automotive Valves “ Lecture Notes in Mechanical Engineering 10.1007/978-981-13-6374-0_15
137 Vijayavel P., Balasubramanian V. 2019 “Effect of pin volume ratio on wear behaviour of friction stir processed LM25AA-5%SiCp metal matrix composites” Alexandria Engineering Journal 10.1016/j.aej.2018.07.008
138 Vallapudi D.R., Makineni H.K., Pisipaty S.K., Venu H. 2019 “Combined impact of EGR and injection pressure in performance improvement and NOx control of a DI diesel engine powered with tamarind seed biodiesel blend”Environmental Science and Pollution Research 10.1007/s11356-018-3540-7
139 Venu H., Dinesh Babu M. 2019 “Improvement of ternary fuel combustion with various injection pressure strategies in a toroidal re-entrant combustion chamber” Environmental Science and Pollution Research 10.1007/s11356-018-3174-9
140 Kumar S.D., Ravichandran M. 2019 “ Synthesis, Characterization and Wire Electric Erosion Behaviour of AA7178-10 wt.% ZrB2 Composite Silicon”10.1007/s12633-018-9802-7
141 Stalin B., Sudha G.T., Ravichandran M. 2019 “Investigations on Characterization and Properties of Al-MoO3 Composites Synthesized Using Powder Metallurgy Technique Silicon” 10.1007/s12633-018-9803-6
142 Mohamed Illyas S., Ramesh Bapu B.R., Venkata Subba Rao V. 2019 “Heat transfer and flow visualization of swirling impinging jet on flat surface using helicoid inserts “ Journal of Visualization 10.1007/s12650-018-0493-3
143 T.Sathish, M.D.Vijayakumar, P.Periyasamy 2018 “Analysis And Modeling Of Support Vector Mechanism For The Biomass Gasification Process” International Conference of Recent Advances in Mechanical Engineering PISSN: 1812-1837, EISSN 2312-7791
144 Vimalanathan K and Ramesh Babu T 2018  “A Study on the Effect of Ergonomics on Computer Operating Office Workers in India”10.4172/2165-7556.1000211
145 Senthil Kumar J., Ramesh Bapu B.R. 2018 “Experimental analysis of DI diesel engine using dual biofuel blended with diesel” International Journal of Ambient Energy 10.1080/01430750.2018.1472647
146 Pandian A.K., Munuswamy D.B., Radhakrishanan S., Devarajan Y., Ramakrishnan R.B.B., Nagappan B. 2018 “Emission and performance analysis of a diesel engine burning cashew nut shell oil bio diesel mixed with hexanol Petroleum Science” 10.1007/s12182-017-0208-8
147 Vijaya Kumar M.D., Vignesh Kumar U. 2018 “Defect rectification in forging operation and optimizing the process parameters” Lecture Notes in Mechanical Engineering 10.1007/978-981-13-1724-8_49
148 Sukumar T., Bapu B.R.R., Prasad B.D. 2018 “Determination of sealing pressure in hyperelastic O-ring with different hardness using numerical method” Journal of Elastomers and Plastics 10.1177/0095244318817889
149 Muthuraman P., Omkumar M. 2018 “Processing and characterisation of aluminium-nano iron composite preforms during cold upsetting” Journal of the Balkan Tribological Association
150 Sathish T., Vijayakumar M.D., Krishnan Ayyangar A. 2018 “Design and Fabrication of Industrial Components Using 3D Printing” Materials Today: Proceedings 10.1016/j.matpr.2018.03.036
151 Stalin B., Meignanamoorthy M., Ravichandran M. 2018 “Synthesis of metal matrix composites and alloys by mechanical alloying: A Review”IOP Conference Series: Materials Science and Engineering 10.1088/1757-899X/402/1/012097
152 Stalin B., Ravichandran M., Arivukkarasan S., Mohanavel V. 2018 “Weight loss corrosion studies of aluminium-LM4 reinforced with alumina silicate (Al2O3SiO2) particulates composites in sodium chloride (NACL) solution”International Journal of Mechanical and Production Engineering Research and Development
153 Krishnan S., Pradeepa K., Thirumal P. 2018 “Open loop and closed loop analysis of interleaved converter for solar power generation systems”International Journal of Mechanical Engineering and Technology
154 Dhinakaran V., Siva Shanmugam N., Sankaranarayanasamy K., Rahul R. 2018” Analytical and numerical investigations of weld bead shape in plasma arc welding of thin Ti-6al-4v sheets Simulation” 10.1177/0037549717726580
155 Kishore Pandian A., Munuswamy D.B., Radhakrishana S., Bathey Ramakrishnan R.B., Nagappan B., Devarajan Y. 2018 “Influence of an oxygenated additive on emission of an engine fueled with neat biodiesel” Petroleum Science 10.1007/s12182-017-0186-x
156 Pandian A.K., Ramakrishnan R.B.B., Devarajan Y. 2018 “ Emission analysis on the effect of nanoparticles on neat biodiesel in unmodified diesel engine” Environmental Science and Pollution Research 10.1007/s11356-017-9973-6
157 Ramesh Bapu B.R., Gayathri N., Vijayakumar B., Shanmuganathan V.K. 2018  “ Chemical synthesis and characterization of thoria incorporated yttria ceria-stabilized zirconia nano particles for high temperature applications” Digest Journal of Nanomaterials and Biostructures
158 Gaikwad P.U., Balan K.N., Ramesh Bapu B.R. 2018 “ Performance analysis of neem and palm bio-diesel blend on diesel engine – A review”International Review of Mechanical Engineering 10.15866/ireme.v11i9.13244
159 Rajagopal K., Karthikeyan A., Duraisamy P. 2018 “ Chaos Suppression in Fractional order Permanent Magnet Synchronous Generator in Wind Turbine Systems” Nonlinear Engineering 10.1515/nleng-2016-0059
160 R.Kishore 2017 “Home Automation Using Wi-Fi Interconnection”International Research Journal of Engineering and Technology 2395-0072
161 V.Ravin Rose 2017 “ Development & Construction of Reverse Gear Mechanism for Physically Challenged Vehicle” International Journal for Scientific Research & Development ISSN:2321-0613
162 Senthil Kumar J., Ganesan S., Sivasaravanan S., Padmanabhan S., Krishnan L., Aniruthan V.C. 2017 “Effects of Nano Additives in engine emission Characteristics using Blends of Lemon Balm oil with Diesel” IOP Conference Series: Materials Science and Engineering10.1088/1757-899X/197/1/012022
163 Kanimozhi B., Ramesh Bapu B.R., Pranesh V. 2017 “ Thermal energy storage system operating with phase change materials for solar water heating applications: DOE modelling” Applied Thermal Engineering 10.1016/j.applthermaleng.2017.05.122
164 Rajagopal K., Karthikeyan A., Srinivasan A.K. 2017 “FPGA implementation of novel fractional-order chaotic systems with two equilibriums and no equilibrium and its adaptive sliding mode synchronization “ Nonlinear Dynamics
165 Rajagopal K., Karthikeyan A. 2017 “ Chaos suppression of fractional order Willamowski-Rössler chemical system and its synchronization using sliding mode control” Nonlinear Engineering
166 Rajagopal K., Karthikeyan A., Duraisamy P. 2017 “Chaos Suppression in Fractional Order Permanent Magnet Synchronous Motor and PI controlled Induction motor by Extended Back stepping Control” Nonlinear Engineering
167 Ramesh Bapu B.R., Saravanakumar L., Durga Prasad B. 2017 “Effects of combustion chamber geometry on combustion characteristics of a DI diesel engine fueled with calophyllum inophyllum methyl ester “ Journal of the Energy Institute 10.1016/j.joei.2015.10.004
168 M.D.Vijayakumar, M.JanakiManohar, C.Silamparasan, 2016 “ Experimental Investigation of SS 410 using NdYag Laser Cutting”  International Journal of Advanced and Innovative Research vol.04. Is. 06 2278-7844
169 Surendran.R, Shanmugaselvam.P and Kumaravel.A 2016 “Evaluation Of Wear And Hardness Of LM25 Alloy Reinforced With Nano Al2O3 And Micro Tib2 “ International Journal of Applied Engineering Research  ISSN 0973-456
170 L.Saravanakumar Dr.B.R.Ramesh Bapu Dr.B.Durga Prasad  2016 “Effect of Injection Pressure and Combustion Chamber Geometry on Diesel Engine Fueled with CalophyllumInophyllum Methyl Ester “ International Journal of Applied Engineering Research ISSN 0973-4562
171 B.R. Ramesh Bapu , L.Saravanakumar, B.Durga Prasad  2016 “ Effects of Combustion Chamber Geometry on Combustion Characteristics of a DI Diesel Engine Fueled with Calophyllum Inophyllum Methyl Ester”  Journal of the Energy Institute 10.1016/j.joei.2015.10.004
172 Praveen Kumar K, Janaki Manohar 2016 “Finite Element Analysis and Optimization Of An One Way Clutch Used In Automatic Transmission Based On Global Parameters” IJRET-International Journal Of Research In Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308
173 Surendran.R, Shanmugaselvam.P, Kumaravel.A 2016 “ Evaluation Of Wear And Hardness Of LM25 Alloy Reinforced With Nano Al2O3 And Micro Tib2” International Journal of Applied Engineering Research ISSN 0973-4562
174 Mr.S.Kannan,  Mr.P.PrincePackiyaraj 2016 “ Fabrication and Analysis of Engine Valve Guide” ISSN 0973-4562
175 D.Kumaryogeesh,  B.R.Ramesh bapu Erikiananda.K2016 “Modeling and Simulation of shock absorber for noise rectification” ISSN 0973-4562
176 K.T.AnandA. John RajanK. V. Narayanan B.R. Ramesh Bapu 2016 “ The Impact of Plasma Treatment as a Sustainable and Green Technology on the Supply Chain Management of the Spinning Mills”  ISSN 0973-4562
177 Gayathri.N,Ramesh Bapu.B.R, Shanmuganthan.V.KRaphael.T 2016 “ Surface Analysis of Ceramic Coated Turbine blade” International Journal of Applied Engineering Research ISSN 0973-4562
178 G.Suganya, B.R.Ramesh Bapu, 2016 “ Investigative Research Of Compact pcm Filled Thin Tube Latent Heat Solar Water Heater” International Journal of Applied Engineering Research ISSN 0973-4562
179 Suganya G., Ramesh Bapu B.R. 2016 “Experimental studies on performance of latent heat thermal energy storage unit integrated with solar water heater”  International Journal of Chemical Sciences
180 Anand K.T., John Rajan A., Narayanan K.V., Ramesh Bapu B.R. 2016 “Key variables in the control of lead time in spinning mills Fibres and Textiles in Eastern Europe” 10.5604/12303666.1179078
181 Anand K.T., John Rajan A., Narayanan K.V., Ramesh Bapu B.R. 2016 “The impact of plasma treatment as a sustainable and green technology on the supply chain management of the spinning mills” International Journal of Applied Engineering Research
Department of Bio medical Engineering :
1 George K., S I.J., Thomas N.S., R B., K B. 2019 ” Gender-Based Vegetarian and Nonvegetarian Dietary Impact on Cardiac Autonomic Function of Heart Rate Variability” Journal of the American College of Nutrition
ONLINE ADMISSION 2021