CENTER FOR ADDITIVE MANUFACTURING

Completed:

Pursuing:

UG Scholars

Science Citation Index Expanded

1. Chalawadi, Damodar, Subramanian Palani Kumaresh Babu, and Veeman Dhinakaran. “Experimental Investigation of TIG Welded Additive Manufactured Inco-718 Sheets.” Materials Research 23, no. 2 (2020).

2. Arunkumar, Muthusamy, Veeman Dhinakaran, NallathambhiSivashanmugam, and Vijay Petley. “Effect of Plasma Arc Welding on Residual Stress and Distortion of Thin Titanium Sheet.” Materials Research 22, no. 6 (2019).

3. Veeman, Dhinakaran, T. Sathish, Vijay Petley, and Gokulakrishnan Sriram. “EXPERIMENTAL INVESTIGATION ON PLASMA ARC WELDED Ti64 SHEETS.” Transactions of the Canadian Society for Mechanical Engineering ja (2019)

4. Dhinakaran, V., N. Siva Shanmugam, K. Sankaranarayanasamy, and R. Rahul. “Analytical and numerical investigations of weld bead shape in plasma arc welding of thin Ti-6al-4v sheets.” Simulation 93, no. 12 (2017): 1123-1138

Scopus Indexed

6. Gokulakrishnan Sriram, V. Dhinakaran, Jagadeesha T ” Finite Element simulation of Temperature Distribution and Residual Stress in Single Bead on Plate Weld Trial using Double Ellipsoidal Heat Source Model” International Journal of Recent Technology and Engineering 8, no. 1S2(2019):  133-138.

7. Thammaiah Gowda, Jagadeesha T, V. Dhinakaran ” Optimization of Design Parameters of Aircraft Wing Structure with Large Cut Outs using Damage Tolerant Design and Finite Element Analysis Approach” International Journal of Recent Technology and Engineering 8, no. 1S2(2019):  128-132.

8. R.Kishore, G.Karthick, M.D.Vijayakumar, V. Dhinakaran “Analysis of Mechanical Behaviour of Natural Filler and Fiber Based Composite Materials” International Journal of Recent Technology and Engineering 8, no. 1S2 (2019):  117-121.

9. S. Dineshkumar, Shrinidhy Sriram, R Surendran, V. Dhinakaran “Experimental Investigation of Tensile Properties of Ti-6Al-4V alloy at Elevated Temperature” International Journal of Recent Technology and Engineering 8, no.1S2 (2019):  103-107.

10. V. Dhinakaran, Rakesh Patil, Gokulakrishnan Sriram, N. Siva Shanmugam ” Studies on Crack propagation in Plasma Arc Welded Ti-6Al-4V Joint during Erichsen Cupping Test ” International Journal of Recent Technology and Engineering 8, no. 1S2(2019):  79-83.

11. MD Vijayakumar, G Gopalaramasubramaniyan, V Dhinakaran” Microstructural Investigation of Is513cr3 by Comparing with Plain Coolant, Ice, Ln2 Gas in Single Point Incremental Forming” International Journal of Recent Technology and Engineering 8, no. 1S2 (2019):  57-62.

12. Nagesha, B. K., V. Dhinakaran, M. Varsha Shree, KP Manoj Kumar, DamodarChalawadi, and T. Sathish. “Review on characterization and impacts of the lattice structure in additive manufacturing.” Materials Today: Proceedings (2019).

13. Dhinakaran, V., M. Varsha Shree, T. Jagadeesha, PM Bupathi Ram, T. Sathish, and B. Stalin. “A review on the recent developments in modeling heat and material transfer characteristics during welding.” Materials Today: Proceedings (2019).

14. Dhinakaran, V., J. Ajith, A. Fathima Yasin Fahmidha, T. Jagadeesha, T. Sathish, and B. Stalin. “Wire Arc Additive Manufacturing (WAAM) process of nickel based superalloys–A review.” Materials Today: Proceedings (2019).

15. M. Swapna Sai, V. Dhinakaran, K. P. Manoj Kumar et al., A systematic review of effect of different welding process on mechanical properties of grade 5 titanium alloy, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2019.09.027

16. Varsha Shree M, Dhinakaran V, Rajkumar V, Bupathi Ram P M, Vijayakumar M D, T Sathish, Effect of 3D printing on supply chain management, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2019.09.060

17. Nagesha, B. K., V. Dhinakaran, M. Varsha Shree, KP Manoj Kumar, and T. Jagadeesha. “A review on weldability of additive manufactured titanium alloys.” Materials Today: Proceedings (2020).

18. Dhinakaran, V., K. V. Surendar, MS Hasunfur Riyaz, and M. Ravichandran. “Review on study of thermosetting and thermoplastic materials in the automated fiber placement process.” Materials Today: Proceedings (2020).

19. Dhinakaran, V., M. Lavanya, K. Vigneswari, M. Ravichandran, and M. D. Vijayakumar. “Review on exploration of graphene in diverse applications and its future horizon.” Materials Today: Proceedings (2020).

20. Dhinakaran, V., B. Gokhulabalan, A. Rahul Kumar, and M. Ravichandran. “Advancement in materials for industrial safety helmets.” Materials Today: Proceedings (2020).

21. Dhinakaran, V., KP Manoj Kumar, PM Bupathi Ram, M. Ravichandran, and M. Vinayagamoorthy. “A review on recent advancements in fused deposition modeling.” Materials Today: Proceedings (2020).

22. Dhinakaran, V., and T. Jagadeesha. “Tribological characterization of electrolytic hard chrome & WC-C0 coatings.” Materials Today: Proceedings (2020).

23. Liyakat, Nafeez Ahmed, and Dhinakaran Veeman. “Improvement of mechanical and microstructural properties of AA 5052-H32 TIG weldment using friction stir processing approach.” Journal of Materials Research and Technology 19 (2022): 332-344.

24. Nafeez Ahmed, L., Dhinakaran Veeman, and S. M. Muthu. “Effect of Addition of Scandium in Filler Rod on Tungsten Inert Gas Welding of AA5052-H32 Alloy.” Russian Journal of Non-Ferrous Metals 63, no. 3 (2022): 315-327.

Book Chapters Published

1. V. Dhinakaran, Jagadeesha T, Jitendra Kumar Katiyar,” Mechanics and Material Removal Modeling and Design of Velocity Transformers in Ultrasonic Machining’, CRC Press (2020).

2. V. Dhinakaran, Jitendra Kumar Katiyar Jagadeesha T,” Mechanics of Metal Removal in Abrasive Jet Machining”, CRC Press (2020).

3. V. Dhinakaran, Varsha Shree M, Swapna M, RishiekeshRamgopal” Additive Manufacturing and Its Need, Role, Applications in the Automotive Industry”, IGI Global Publication (2020).

4. V. Dhinakaran, P. M. Bupathi ram, B. Stalin, K. P. Manojkumar, ”Advanced Metal joining processes for aerospace applications”, Evincepub Publishing (2020)

5. V. Dhinakaran, P. M. Bupathi ram, N. S. Siva Shanmugam, B. Stalin, ”Wire Arc Additive Manufacturing (WAAM) for aerospace applications”, Evincepub Publishing (2020)

6. V. Dhinakaran, R. Surendran, M. Varsha Shree, Parul Gupta, ”Study on Electric Vehicle (EV) and its developments based on Batteries, Drive system and Charging methodologies in modern world”, Springer publisher (2020)

7. V. Dhinakaran, K. Vigneswari, M. Lavanya, M. Varsha Shree, ”Point of Care Applications with Graphene in Human life”, Elsevier publisher (2020)

8. V. Dhinakaran , R. Surendran , M. Varsha Shree , Suman Lata Tripathi”ROLE OF MODERN TECHNOLOGIES IN TREATING OF COVID-19″ CRC Press(2020)

9. V Dhinakaran , M Varsha Shree, Suman Lata Tripathi, MeenakashiSharma.”An Overview of Evolution, Transmission, Detection and Diagnosis for the Way out of Corona Virus’ CRC Press (2020)

10. V Dhinakaran, M Varsha Shree, T Jagadeesh, M Swapna Sai. “ADDITIVE MANUFACTURING: TECHNOLOGY, MATERIALS AND APPLICATIONS IN AEROSPACE” ISTE Publications, UK(2020)